Thats very interesting mate.
Does the Taigen system allow you to use Lipo without mods?
I have a 1/16 Tamiya RC that i wanted to upgrade but was unsure what to use.
I also picked up one of the new Asiatam 1/16 metal Kubels at Dortmund that is very nice. Asiatam should have the board for that available in the next 2-4 weeks which has lights, sound & motion and works with Lipo.
Tim
Tamiya Kubelwagen
-
Swamprat33
- Lance Corporal
- Posts: 241
- Joined: Wed Aug 29, 2012 10:48 pm
- Location: Milton Keynes Area
Re: Tamiya Kubelwagen
1/6 Armortek Panther ausf.G
1/6 Armortek Panzer III ausf.J
1/6 Type 82 Funkwagen
1/6 Sdkfz 250/9
1/6 Sdkfz 2 Kettenkrad
1/6 Armortek Panzer III ausf.J
1/6 Type 82 Funkwagen
1/6 Sdkfz 250/9
1/6 Sdkfz 2 Kettenkrad
Re: Tamiya Kubelwagen
Excellent looking Kubelwagen! You can be proud of it!
When I was modifying my Sd.Kfz 2 I found some info about rear notek light block - the left red section was for rear light and had a clear glas window on the bottom for lighting number plate. The right section was made with orange section for the brake signal... Hope this info could be usefull...
http://www.kettenkrad.de/notekhi_e.htm
When I was modifying my Sd.Kfz 2 I found some info about rear notek light block - the left red section was for rear light and had a clear glas window on the bottom for lighting number plate. The right section was made with orange section for the brake signal... Hope this info could be usefull...
http://www.kettenkrad.de/notekhi_e.htm
