RC Tank Warfare community hobby forum

hey guys,

i have got the el-mod booster and tls, and a 6 channel receiver. i clipped in the channels to the receiver as shown on the el-mod instructions, and i get no response at all from the tank ? the blinking light on the tls goes from flashing to permanent on after about 5 secs, but the other LED wont come on ?

am i doing something wrong ?

cheers,

Matt

First off, take a look at the site that I created, and the tx section.

http://www.hitenter.co.uk/elmod

If the answer isn't there let me know and I will help you out.

Rob G

hey,

took a look at your site, and i havent got a switch that has a central position, with 2 different ways for machine gun and main gun, and i also havent got a flicky switch for the ignition, i have a twisty knob switch ? anyhoo i dont think i really found an answer ... sorry ... great site though !

thanks.

Matt

matt youve got the 4 channel tls chip in ypour tls so you wont need the other channels, are you getting any lights on the booster

erm no im not

thanks,

Matt

matt you should be getting lights on all boards when you power up, they flash when the rx is not recognised, and on continuous when is on, can you post some good pic's of the set up, we might see something you may of missed or done wrong?, rob, every time i try and go on youre site it comes up "page not found" its got me stumped, any ideas?

          Tony

i turn on the transmitter, and its lights come on, then i turn on the tank, and a single LED on the TLS flashes for about 5-6 seconds and then stays on.

however if the tranny isn't on, and i turn on the tank by itself the same single LED on the TLS flashes again for about 5-6 seconds, and then stays on

ill try and get some pics mate,

cheers,

Matt

sounds odd matt, but the better the pictures you post the more chance we may have of seeing what the score is

              Tony

ive taken pics, loading them to my pc now, but tbh its so crammed you cant make out a lot lol ...

here we go...