Page 1 of 1
Show me your boards
Posted: Mon Nov 10, 2014 7:34 pm
by bfrank1982
Hi guys.
Since I am thinking about how to Mount my IBU2 board in the hull of my sturm tiger, I Was wondering how you guys have done it.
Please show and tell
Since my computer is malfunctioning at the moment, here is a link to my previous post on the subject
http://www.rctankwarfare.co.uk/forums/v ... 23&t=13595
Re: Show me your boards
Posted: Tue Nov 11, 2014 8:29 am
by Tankbear
I don't have any pictures to hand but in my tiger I installed it long side across width of the tank directly behind the gearboxes. This left enough room for the battery to fit .
Needed to remove the plastic stand offs. Also used some computer PCB standoffs in plastic sheet and M3 bolts to secure it in place.
Ian.
Re: Show me your boards
Posted: Tue Nov 11, 2014 9:44 pm
by bfrank1982
Nice. Do you know if there is some extension cords available for the Engine wires? Otherwise my board has to fit longitunally in the hull, wich is okay, but would be Nice with more options....
Re: Show me your boards
Posted: Tue Nov 11, 2014 9:56 pm
by jarndice
BFRANK Hi, If you go to TIPS & TRICKS click on subpage 2 and read QUICK RELEASE TURRETS, you will find an e-bay address for prefitted plugs and cables, very cheap and easy to use, the downside is they come from China and you will have to wait for them to arrive, but the dealer is dead square.
shaun