Crazy Joe's Sherman Rehabilitation
- PainlessWolf
- Lieutenant-Colonel
- Posts: 7407
- Joined: Sun Feb 26, 2012 9:09 pm
- Location: Southern Colorado Rocky Mountains
Re: Crazy Joe's Sherman Rehabilitation
I had a welcome visitor this week. Sassgrunt came into the Front Range to visit family and I managed to steal a few hours of his company last Sunday. With him, he brought exotic gifts from the Land of Leis and Volcanoes, a load of gear for an upcoming 1/6 build and the last piece to complete 'In The Mood'. Alpha had built one of his premium antennas for the tank and made it extra springy so I could replicate the tied down version that St. Sgt. Pool used on his last Sherman. I took the opportunity to add the final detail bits to the shovel mount and finish the tools as well. 'In The Mood' is 100% ( as I see it ) and ready for a Show Off thread. I'll take care of that this weekend. Pictures of last night's work:
- Attachments
-
- Closeup of the antenna mount
- Closeup of the antenna mount.JPG (97.9 KiB) Viewed 3660 times
-
- Brass mounting point ala' Mato
- Brass mounting point ala Mato.JPG (92.67 KiB) Viewed 3660 times
...Here for the Dawn...
Re: Crazy Joe's Sherman Rehabilitation
WHEW!Glad it got there Painless... the one thing I worried about was it getting bent...One tip ... you might want to trim the base in half... I made it long thinking you were going to pull the brass out
Guess we get to see that in the Show off thread Can't wait
SHERMAN POWER IS A GO! PANZER VOR!!!!!!!!!!!!!!!
ALPHA
Guess we get to see that in the Show off thread Can't wait
SHERMAN POWER IS A GO! PANZER VOR!!!!!!!!!!!!!!!
ALPHA
- PainlessWolf
- Lieutenant-Colonel
- Posts: 7407
- Joined: Sun Feb 26, 2012 9:09 pm
- Location: Southern Colorado Rocky Mountains
Re: Crazy Joe's Sherman Rehabilitation
Alpha,
The base is great! ( like the rest of the antenna ;o) The depth of the bottom section matches the height of the Mato brass pretty well and with a drill and mount provides a super sturdy base for pulling the antenna back and roping it into place. I don't have to worry about a bump sending the antenna flipping off of the turret *chuckles* Thank you again, my Friend.
regards,
Painless
The base is great! ( like the rest of the antenna ;o) The depth of the bottom section matches the height of the Mato brass pretty well and with a drill and mount provides a super sturdy base for pulling the antenna back and roping it into place. I don't have to worry about a bump sending the antenna flipping off of the turret *chuckles* Thank you again, my Friend.
regards,
Painless
...Here for the Dawn...
Re: Crazy Joe's Sherman Rehabilitation
That's great Painless...the main thing is it works... the Mato brass does make a good base ...I like that tied back effect ...you will have to do some black and white shots when you do your Show off threadPainlessWolf wrote:Alpha,
The base is great! ( like the rest of the antenna ;o) The depth of the bottom section matches the height of the Mato brass pretty well and with a drill and mount provides a super sturdy base for pulling the antenna back and roping it into place. I don't have to worry about a bump sending the antenna flipping off of the turret *chuckles* Thank you again, my Friend.
regards,
Painless
Carpe Diem Sir
PANZER VOR!!!!!!!!!!!!!!!!!!!!!!
ALPHA
- palepainter
- Sergeant
- Posts: 564
- Joined: Sun Nov 03, 2013 4:04 am
- Location: Lafayette, CO
Re: Crazy Joe's Sherman Rehabilitation
The decals look great. You are right though, your eyes will bug out on that small stuff. Time to break out the 2x and 3x readers. Glad it all came together.
- PainlessWolf
- Lieutenant-Colonel
- Posts: 7407
- Joined: Sun Feb 26, 2012 9:09 pm
- Location: Southern Colorado Rocky Mountains
Re: Crazy Joe's Sherman Rehabilitation
Pale,
Thanks to you and your excellent stencils!
Thank you again!
warm regards,
Painless
Thanks to you and your excellent stencils!
Thank you again!
warm regards,
Painless
...Here for the Dawn...
- HERMAN BIX
- Brigadier
- Posts: 10339
- Joined: Sun Jan 12, 2014 12:15 am
- Location: Gold Coast,Australia
Re: Crazy Joe's Sherman Rehabilitation
Mr Pale, can you make stencils for ambush cam, hard edge 3 colour and Normandy 'swirl' !!!?
HL JAGDPANTHER,HL TIGER 1,HL PzIII MUNITIONSCHLEPPER, HL KT OCTOPUS,HL PANTHER ZU-FUSS,HL STuG III,HL T34/85 BEDSPRING,
HL PZIV MALTA,MATORRO JAGDTIGER,HL F05 TIGER,TAMIYA KT,HL PANTHERDOZER,HL EARLY PANTHER G,TAIGEN/RAMINATOR T34/76,
HL AN-BRI-RAM SU-85
HL PZIV MALTA,MATORRO JAGDTIGER,HL F05 TIGER,TAMIYA KT,HL PANTHERDOZER,HL EARLY PANTHER G,TAIGEN/RAMINATOR T34/76,
HL AN-BRI-RAM SU-85
- PainlessWolf
- Lieutenant-Colonel
- Posts: 7407
- Joined: Sun Feb 26, 2012 9:09 pm
- Location: Southern Colorado Rocky Mountains
Re: Crazy Joe's Sherman Rehabilitation
Good evening,
Sorry to bring this one back to life but I had a rare chance to showcase the 'Mood' and an original MATO Shermans cross country capability. ( in deep snow )
PICS:
Sorry to bring this one back to life but I had a rare chance to showcase the 'Mood' and an original MATO Shermans cross country capability. ( in deep snow )
PICS:
- Attachments
...Here for the Dawn...
- c.rainford73
- Major
- Posts: 6104
- Joined: Thu Aug 25, 2016 7:34 pm
- Location: Connecticut USA
Re: Crazy Joe's Sherman Rehabilitation
Such a good looking tank in a fantastic setting just the mere mention of Crazy Joe got me thinking " will I get a glimpse of the one and only Joe?"
That section you have set aside for a tank arena will be spectacular! Such beautiful country
That section you have set aside for a tank arena will be spectacular! Such beautiful country
Tanks alot....
- PainlessWolf
- Lieutenant-Colonel
- Posts: 7407
- Joined: Sun Feb 26, 2012 9:09 pm
- Location: Southern Colorado Rocky Mountains
Re: Crazy Joe's Sherman Rehabilitation
Carl!
This Sherman was Joes original Command before it was given over to another 'reckless and bold' Sergeant some time ago. ;o)
regards,
Painless
This Sherman was Joes original Command before it was given over to another 'reckless and bold' Sergeant some time ago. ;o)
regards,
Painless
- Attachments
-
- For Carl, the original 'Joe'
- Zom-Closeup.JPG (98.99 KiB) Viewed 3431 times
...Here for the Dawn...