RC Tank Warfare community hobby forum

Hey guys i need some help with a recoil i have a airsoft and i want to put the recoil unit the lights of the tank and the box all together on some 8 pin connector and a 6 board pin something i really need some help

Hello Applelover - good to see you - The Taigen turret is not an airsoft , it has a scale simulated gun instead , it makes a bang , a flash and the barrel recoil ( and elevation ) it does not use the 8 pin socket in the hull because it plugs straight into the RX 18 . The lights , MG and turret turn do still use the 8 pin though , the old wires that worked the airsoft /turn/elevation are not needed anymore .OK ?

But blimp there is a 8 pin socket on the rx18 which says (turn,lift,shoot,lamp) i have the connector i put the connector in the rx18 and on the other side goes in the 8 pin connector how do i connect the 8 pin connector to the recoil unit

There are 3 connectors here where do they go and what do i do with the other blackone with a heating tube aroung it im soooo confuesed right now please someone help

Here it is the 4 connectors

I have these 2 connectors aswell

Could someone please give me instructions for the taigen recoil unit

Apple you are not the first to get confused over the Taigen recoil turret, you wont be the last........

I cant help much but you might want to check out this....

viewtopic.php?f=79&t=11293

On page 2 of the excellent, detailed build thread by Tanks for the Memory you may find your answers ... Thread link below:

viewtopic.php?f=22&t=8350

Thanks tk commander