Page 1 of 1

Anderson Power pole connectors

Posted: Fri Feb 06, 2009 7:20 pm
by mikeh
I was a huge Deans plug follower but have converted to Power Pole connectors for the ease of soldering, the low cost, and the ability to wire them together in paralell or in series without complicated adaptors.

Also, I grew to hate having to buy separate male and female versions of the deans plug. Seemed I always ran out of the one I needed at the worst time. No such problem with PPs since they are all interchangeable.

link to Power poles:
http://www.allspectrum.com/store/produc ... cts_id=464

Heres where I'd get deans plugs in bulk anyway.
http://www.dealextreme.com/details.dx/sku.10788

Whichever you prefer, changing the stock connector is a must in my opinion.

Re: Anderson Power pole connectors

Posted: Fri Feb 06, 2009 7:47 pm
by tiger205
nice links mikeh, ive never heard of power pole connecters, still you learn something new every day, and the prices seem good aswell. do those company ship to the uk?, i ask cos the prices are in $'s

          Tony 8)

Re: Anderson Power pole connectors

Posted: Fri Feb 06, 2009 7:58 pm
by mikeh
I am not sure if they ship internationally, but I would thing so. Either way, there aught to be a source for them in the UK. I just did an internet search to find those sites.

I knew of the Power Poles from my other RC interests. The advantage is that they are interchangable, can be crimped on as well as soldered, are sold in pairs, easy to solder, and have low loss of current.

But I am told that the Deans plugs have the lowest possible loss, lower than the PPs. I cannot tell the difference in performance and use both. I am gradually changing over to PPs as I buy new batteries, ESCs etc. In the meantime I made several deans to PPs convertion plugs.

Re: Anderson Power pole connectors

Posted: Fri Feb 06, 2009 8:08 pm
by tiger205
thanks for that mikeh, i'll look into it to see if i can find them here, and email the guys in the links you put up, i got to say they do look like they are really compact, not as bulky as deans con's, which is usefull if space is tight

            Tony 8)

Re: Anderson Power pole connectors

Posted: Fri Feb 06, 2009 9:54 pm
by AndyD
Just found a supplier on Flea-bay; he goes under the name of whl_777. I'll sort out a link.

Andy

here we are: http://stores.ebay.co.uk/GET-CONNECTED-PLUGS_POWERPOLES_W0QQcolZ4QQdirZ1QQfsubZ11795705QQftidZ2QQtZkm

Re: Anderson Power pole connectors

Posted: Sat Feb 07, 2009 5:13 pm
by tiger205
thanks for that andy i'll have a butchers at the link, and may wellget some

              Tony 8)

Re: Anderson Power pole connectors

Posted: Tue Nov 06, 2012 12:34 am
by Swamprat33
Hi all, I used to use Power Poles years ago when I raced RC cars.

I much preferred them to Deans.
They are same quality as Deans but neater and easier to use.
The only down side maybe limited availability.

I have just bought a set to use with my HL panther G.

Cheers
Tim