Page 1 of 1
Matorro to H/L conversion HELP neded
Posted: Fri Feb 06, 2009 4:01 pm
by tankman
HELP has anyone got a wiring schematic for the Matorro King Tiger. I have removed the old Matorro electronics and put in an RX14 board I have sorted the drive motors, turret rotation barrel elevation and front light. What I need is how to connect up the air soft unit. So can anyone give me an idiots guide to connecting Matorro wiring to H/L wiring. Also the front machine gun do I have to change the LED as everytime I connect it it glows but will not flash in scync with the machine gun sound. All the best for now
Alan
Re: Matorro to H/L conversion HELP neded
Posted: Sun Feb 08, 2009 1:21 am
by tankman
Hi guys panic over. Got the KT running at last. For anyone who is intrested here is the way I did it :-
Matorro wiring Heng Long wiring
red to
green
= front light
black to white
yellow to
red = turret rotation
blue to
black
brown to
blue =elevation motor
green to
brown
white to
yellow = shot motor ( also goes to on/off switch in turret )
a
blue wire connects shot and elevation motors
Hope this is of some use to you. All the best for now
Alan
Re: Matorro to H/L conversion HELP neded
Posted: Sun May 02, 2010 9:21 pm
by aussieharry
hello tankman, this looks great. but i need Matorro to H/L conversion help for the same problem, only with the rx18 henglong unit to matorro. maybe you have this to. if. yes, could you please make a scatch drawing for me.i'm not a lizzard in electronic.
thank you for your attention
regards
harry