RC Tank Warfare community hobby forum

hi chaps
your help is required with wiring a mato turret...
were do I put the red white motor wire to turn turret ,brown 'green elevation turret wire into the 2.4 unit so it works this is something else I am rubbish at , wot wot

You know what's funny Canned... I read the problem before looking who had it ... the first thing that popped into my mind was... This is a question Canned could handle Then I looked at the who so I could reply.... Turns out it's you

Anyway... off the top of my head I don't know... but I still have sassgrunts M4 so I'll take a look at his... should no one else pop in that is

ALPHA

canned,

It should go into pin 7/8 on CN9, but you should have an eight pin mount that will also connect the MG and the light to CN9 as well. If you just want to see if it will work for now, you can just plug the 2 pin into the end of CN9 and it should work.

MichaelC

MichaelC wrote:canned,

It should go into pin 7/8 on CN9, but you should have an eight pin mount that will also connect the MG and the light to CN9 as well. If you just want to see if it will work for now, you can just plug the 2 pin into the end of CN9 and it should work.

MichaelC

cheers old chap wot wot job done we have lift we have power we have cracked it .........

SORTED.... ALRIGHT ! Didn't have to tear into sassgrunt's tank

Thanks MichealC ...Have fun Canned !

ALPHA