RC Tank Warfare community hobby forum

Having been made an offer I couldn't refuse for the previous early tiger I had just completed I have managed to snaffle a bargain tamiya tiger off eBay, £170 with battery's, 6ch tx/rx and chargers. It was described as being 10 years old so I was expecting the old tus. However I was pleasantly surprised by the modern ones that it actually came with.

Some small tinkering was required, the fella couldn't get the recoil working (I suspecet because of the digital trims on the tx) and when I got it going the recoil was very sticky which can break the mfu. Some bending and grinding was required but it's all working.

I also looks like its sitting down very slightly on its suspension so I might replace the torsion bars with the new ones I got with the previous tiger I built.

Pictures and a vid to follow!

Good Evening,
Congratulations, Tom! Always a pleasure to follow a Build of yours. Awaiting the visuals.
regards,
Painless

Can't wait for the classes to begin.

Sounds like you got a super deal on that Tiger...

ALPHA

I wish you had posted the work on the recoil... never worked on one before...is it difficult clearance wise?

ALPHA

Alpha, it was pretty much squaring up the brackets that where already there and using a dremel to slightly expand the highlighted section:

Well I have broken my newly imposed golden rule of not having more than one build on the go (I guess this build predates that rule!!). Any way I have decided this tiger is going to become a tunisia initial tiger; inspired by some of the recent builds.

To this end I have ordered the tamiya K sprue from axles, in addition I will be using some of the photo etch from the voyger set, new schumo headlights, aber 2m ariel etc.

Heres some pictures of the destruction to date; removed the mantlet, existing headlights (these will be relocated as per the field modifications). I've removed the original air filters and the exhaust covers.









Something I need to locate is checker plate to make the early pattern front fenders. If anyone knows where I can get this let me know!

Hi Tom Nice buy ,now all I have to say is 131

regards pete

Cheers Pete! 131 would definitely be easiest the k sprue doesn't give you the funky square squarish exhaust covers. But I'm sure they would be possible to scratch them.

Hi I think Dave has them in photo etch parts .Best to check with him .

regards pete

Some more progress today, assembled the hatches; k sprue detail is very nice!! Also finally used my high detail schumo 2m ariel and base. I've also assembled the air filters and cleaned up the rear plate. I've got to research further if these tigers had the mounts for the s mine launchers.