RC Tank Warfare community hobby forum

Hiya all

I been waiting for an age for my parts for the tortoise to turn up ...and i just can't sit for hours on the www looking at all the builds going on and not do anything ...

So sat down this evening with a small pile of plastic card ..some hl king tiger road wheels and rear idelers ...panther g chassis ...metal king tiger suspension arms and a pair of hl gearbox's ....panther track and sprockets .... odd mixture ...but what the hell ....

I started to build an ..........?

e10?

Yes kind of ....the E-10 would have tracks very similar to the hetzer .with prob a single roadwheel per axel ..where i have two and panther tracks ..its really some where between and E-10 and E -25 .......so ..E-15 ?

I am going to use this . As a platform for learning how to construct an angled hull .... for a project i have ...

Hi all

Just a quick update ...still waiting for parts for the tortoise ..and i just can't sit infront of the tv and do nothing .....so i played with the E-10 a bit more ...
I added the outer spronsens ...and the hull roof ....and changed the suspension arms to metal ..which are hl king tiger ..and made new road wheel shafts ....any way ...a few pics

Very Cool mcevoyi

ALPHA

Hi Alpha

the image using the E 10 is unfortunately a fake. The E 10 was unfortunately never built because it was a Parallellentwiklung the Jagdpanzer 38 was then decided for.

I have the E 10 yes also built several times. A great but not quite simple vehicle.

By the way, your wheels are much too small.

Cheers Edwin

Edwin wrote:Hi Alpha

the image using the E 10 is unfortunately a fake. The E 10 was unfortunately never built because it was a Parallellentwiklung the Jagdpanzer 38 was then decided for.

I have the E 10 yes also built several times. A great but not quite simple vehicle.

By the way, your wheels are much too small.

Cheers Edwin

Yes Edwin... I know.. there was a short description when I found the photo... that is a mock up .. yes a fake

ALPHA

Hi Alpha

I have a drawing of Glöckner-Humbold- Deutz of E 10

http://www.google.de/imgres?client=fire ... =110&ty=40

And here on my website

http://apamotec.de.tl/E_10--g-Hetzer-g-.htm

Cheers Edwin

Edwin wrote:Hi Alpha

I have a drawing of Glöckner-Humbold- Deutz of E 10

http://www.google.de/imgres?client=fire ... =110&ty=40

And here on my website

http://apamotec.de.tl/E_10--g-Hetzer-g-.htm

Cheers Edwin

Very cool Edwin... You machine stuff right? are those 1/6 or 1/16? .... they're awful pretty

ALPHA

I built the E10 are 1/16 and I have also built to lowering drive. My E10 I can remotely store on the tub