RC Tank Warfare community hobby forum

Hello all,
im very new in RC tanks 1/16. My nephew have an old skool Henglong King tiger with TK01 Board. i'm ask him to this and that, but he doesn't understand. so far he just playing at his room , since now he's been busy with his accountant works . a good way to borrow and paid by me and its works! .

So im planning upgrade to TK22 And 2.4ghz Transmitter.
- Is it OK upgrade TK01 to Clark TK22? How about the barrel recoil? is it run smooth? (since old skool TK01 Doesnt have recoil system)
- Are TK22 Bind with Turnigy 6x?

thanks,
Jimm

Jimm,

When you said old skool KT, do you mean the one from Heng Feng/Matarro with the Production turret and the molded on zims ? I just converted mine to TK-22 with recoil. I originally had converted to RX-18, then Taigen 2.4Ghz with MAKO and then TK-22 with servo recoil. The recoil is not very straight forward as the mantlet and the barrel is all attached in one piece, so you basically have to destroy the mantlet to take the barrel out. I was lucky I had some extra parts of a Tamiya KT turret so I used that mantlet instead.

Anyway, if is the same one I can post some videos for you.

MichaelC wrote:Jimm,

When you said old skool KT, do you mean the one from Heng Feng/Matarro with the Production turret and the molded on zims ? I just converted mine to TK-22 with recoil. I originally had converted to RX-18, then Taigen 2.4Ghz with MAKO and then TK-22 with servo recoil. The recoil is not very straight forward as the mantlet and the barrel is all attached in one piece, so you basically have to destroy the mantlet to take the barrel out. I was lucky I had some extra parts of a Tamiya KT turret so I used that mantlet instead.

Anyway, if is the same one I can post some videos for you.

Hi michael,
yes it was a molded. and the barrel is alloy cast. i have the same thing to destroy it .
for the videos. please post for my knowledge . thanks.

Seems like Out of stock for TK22 in local distributor. But my friend ordering RX18. for a while i will using RX18.
Are TK01 Board can Upgrade to RX18? How about the Remote? are sync/bind with RX18 board.

Jimm,

You will need a new radio with the RX-18. I don't remember getting the old KT board to work with the Heng Long radio.

MichaelC

Jimm,

Here you go....... Sorry about the delay, but here is my Heng Feng/Matarro KT, with the latest Clark TK-22 board (Supposedly with the Bovington Tiger sound), Tamiya metal barrel and muzzle brake with HiTec HS-311 micro servo recoil.

http://www.youtube.com/watch?v=Rb1-lCzr ... e=youtu.be

MichaelC

Thanks michael.
Is there any guide to upgrade from TK01 to RX18?....
thanks.

Jimm,

Just check out the wiring diagram on the RX-18 and you just have to map them out from the TK-01......... Don't think there is a guide per sa.

MichaelC

wtfworks wrote:Thanks michael.
Is there any guide to upgrade from TK01 to RX18?....
thanks.

This is the closest to a guide I can find http://www.tankzone.co.uk/pages/hl_upgrade_rx.htm but really you need to start from scratch as the TK01 is soldered to every component and the RX18 is all plug in so none of your parts will have the plugs fitted

Hi, thanks both of you.

my board are TK01. kind of pre-historic electroboard >_<.
im still finding the TK01 signal cable, positive & Negative connecting to RX18 CN8