Hi guys,
today you are going to modify the storage box at the back of the turret.
What´s wrong with it?
If you take a look from the above you´ll see, that the box edges are faced almost 90° to the turret.
If you take a look to the original you´ll see, the angle is different.
Now you can either replace the whole box or you can add two corners.
By replacing the whole box you also have to create new brackets for the elevation device.
The easiest way is to add two corners. I show you my way.
First I took a leftover Tiger turret and market the edges I needed.
Then I cut off the corners.
Adjusted them to the box and glued them.
Closed the bottom gap.
At last there is a little grinding work to do. That´s it.
If you don´t have a leftover, you also can use poly and create a corner by using plates.
Greetings
Birger
For a lot more help with your Heng Long Tiger I tank, follow the below link ...
http://www.rctankwarfare.co.uk/forums/v ... 18&t=11459
HL-Tiger rommel storage box
HL-Tiger rommel storage box
Fahrzeuge einsatzbereit: Tiger I HL 313, Tiger I Tamiya S33, Star Wars Tiger, Bergetiger
In der Inst: HL-PIII Lackierung, Vollkettenschlepper, Tiefladeanhänger
In Planung: MLRS,Crusader, KöTi, Jagdtiger, PIII, PIV,
In der Inst: HL-PIII Lackierung, Vollkettenschlepper, Tiefladeanhänger
In Planung: MLRS,Crusader, KöTi, Jagdtiger, PIII, PIV,
- Will01Capri
- 2nd Lieutenant
- Posts: 2704
- Joined: Tue Jul 18, 2017 5:34 pm
- Location: South Scotland
Re: HL-Tiger rommel storage box
I know this is an old post, but where can you get a blueprint of the views of the Tiger 1's?
In fact anyone know where you can get it for most of the 1/16 tanks?
In fact anyone know where you can get it for most of the 1/16 tanks?
HL camo E' Tiger
HL L' Tiger
M26 Pershing WW2 project
Tam K'Tiger project
HL Walker Bulldog project?
HL Panzer IV Munitionsschlepper für Karl-Gerät
HL Sherman project?
1/24 Leopard 2 Custom mod
2 many trucks to list!
HL L' Tiger
M26 Pershing WW2 project
Tam K'Tiger project
HL Walker Bulldog project?
HL Panzer IV Munitionsschlepper für Karl-Gerät
HL Sherman project?
1/24 Leopard 2 Custom mod
2 many trucks to list!
- jarndice
- Colonel
- Posts: 8029
- Joined: Mon Sep 03, 2012 11:27 am
- Location: the mountains of hertfordshire
Re: HL-Tiger rommel storage box
Hi, There are two Blueprints sites that I use,
One is free and is not quite as detailed as the other which does make a small charge,
Go to---
www.the-blueprints.com
And----
www.drawingdatabase.com
Just type in what you are searching for and you will be presented with a very long detailed list to select from.
Shaun.
One is free and is not quite as detailed as the other which does make a small charge,
Go to---
www.the-blueprints.com
And----
www.drawingdatabase.com
Just type in what you are searching for and you will be presented with a very long detailed list to select from.
Shaun.
I think I am about to upset someone