HL-Tiger side mudguards
Posted: Thu Aug 29, 2013 12:16 pm
Hi guys,
today, we are going to modify the mudguards.
There is not much to do, just cutting.
Normally the front mudguards are movable.
The hinches are already indicated.
So we have to cut them twice.
Before:
After:
Same thing with the side mudguards.
On both sides there are four mudguards.
But on the HL they are not separate.
Lets at least make them look like.
Before:
After:
Because the mudguards are screwed to the hull, we have to simulate that, too.
So cut them there, too.
But just a little bit to simulate the slit.
Before:
After: (hard to see in the picture)
I hope you can see it.
That´s it.
Greetings
Birger
For a lot more help with your Heng Long Tiger I tank, follow the below link ...
http://www.rctankwarfare.co.uk/forums/v ... 18&t=11459
today, we are going to modify the mudguards.
There is not much to do, just cutting.
Normally the front mudguards are movable.
The hinches are already indicated.
So we have to cut them twice.
Before:
After:
Same thing with the side mudguards.
On both sides there are four mudguards.
But on the HL they are not separate.
Lets at least make them look like.
Before:
After:
Because the mudguards are screwed to the hull, we have to simulate that, too.
So cut them there, too.
But just a little bit to simulate the slit.
Before:
After: (hard to see in the picture)
I hope you can see it.
That´s it.
Greetings
Birger
For a lot more help with your Heng Long Tiger I tank, follow the below link ...
http://www.rctankwarfare.co.uk/forums/v ... 18&t=11459