How to remove the HL-Tiger drive wheels
Posted: Thu Aug 29, 2013 11:10 am
Hi guys,
how can you remove the drive wheels?
1. Remove the Tiger tracks
http://www.rctankwarfare.co.uk/forums/v ... 18&t=11460
![Image](http://i158.photobucket.com/albums/t118/birger_photos/Tiger/Fehler%20und%20Behebung/Fahrwerk/Antriebsraeder/PICT5502.jpg)
Use a small screwdriver to lift the center lid.
![Image](http://i158.photobucket.com/albums/t118/birger_photos/Tiger/Fehler%20und%20Behebung/Fahrwerk/Antriebsraeder/PICT5503.jpg)
![Image](http://i158.photobucket.com/albums/t118/birger_photos/Tiger/Fehler%20und%20Behebung/Fahrwerk/Antriebsraeder/PICT5504.jpg)
The shape of screws can vary.
Unscrew it and pull of the wheel.
![Image](http://i158.photobucket.com/albums/t118/birger_photos/Tiger/Fehler%20und%20Behebung/Fahrwerk/Antriebsraeder/PICT5504.jpg)
![Image](http://i158.photobucket.com/albums/t118/birger_photos/Tiger/Fehler%20und%20Behebung/Fahrwerk/Antriebsraeder/PICT5505.jpg)
![Image](http://i158.photobucket.com/albums/t118/birger_photos/Tiger/Fehler%20und%20Behebung/Fahrwerk/Antriebsraeder/PICT5506.jpg)
Reassembling works the other way round.
PS:
If you have a version with a crossed-head screw, please replace them with similar hexagon socket screws. Those are easier to change and the heads last longer. The crossed-head ones easier make problems with the crossed slit by use it to often. If the crossed-head is damaged, it is almost impossible to unscrew it.
Greetings
Birger
For a lot more help with your Heng Long Tiger I tank, follow the below link ...
http://www.rctankwarfare.co.uk/forums/v ... 18&t=11459
how can you remove the drive wheels?
1. Remove the Tiger tracks
http://www.rctankwarfare.co.uk/forums/v ... 18&t=11460
![Image](http://i158.photobucket.com/albums/t118/birger_photos/Tiger/Fehler%20und%20Behebung/Fahrwerk/Antriebsraeder/PICT5502.jpg)
Use a small screwdriver to lift the center lid.
![Image](http://i158.photobucket.com/albums/t118/birger_photos/Tiger/Fehler%20und%20Behebung/Fahrwerk/Antriebsraeder/PICT5503.jpg)
![Image](http://i158.photobucket.com/albums/t118/birger_photos/Tiger/Fehler%20und%20Behebung/Fahrwerk/Antriebsraeder/PICT5504.jpg)
The shape of screws can vary.
Unscrew it and pull of the wheel.
![Image](http://i158.photobucket.com/albums/t118/birger_photos/Tiger/Fehler%20und%20Behebung/Fahrwerk/Antriebsraeder/PICT5504.jpg)
![Image](http://i158.photobucket.com/albums/t118/birger_photos/Tiger/Fehler%20und%20Behebung/Fahrwerk/Antriebsraeder/PICT5505.jpg)
![Image](http://i158.photobucket.com/albums/t118/birger_photos/Tiger/Fehler%20und%20Behebung/Fahrwerk/Antriebsraeder/PICT5506.jpg)
Reassembling works the other way round.
PS:
If you have a version with a crossed-head screw, please replace them with similar hexagon socket screws. Those are easier to change and the heads last longer. The crossed-head ones easier make problems with the crossed slit by use it to often. If the crossed-head is damaged, it is almost impossible to unscrew it.
Greetings
Birger
For a lot more help with your Heng Long Tiger I tank, follow the below link ...
http://www.rctankwarfare.co.uk/forums/v ... 18&t=11459