RC Tank Warfare community hobby forum

Does anyone have any recommendations for track tensioners for the HL King Tiger?

Hi Glen....

i have fitted a set of Tankmodelbau adjusters to a KT belonging to a friend , they have proved reliable and were an easy fit .

I have posted a link to Steve at welsh Dragon who sells them ...

http://www.welshdragonmodels.co.uk/tank ... 1581-p.asp

You will also need the asiatam rear idler wheels with bearings to use the tensioners , also sold by Steve .


Good luck

Thanks, nice to get a report from someone who has had some experience with them.

Has anyone tried these?

http://www.rctank.de/product_info.php?c ... ts_id=1536

Wildboar44 wrote:Hi Glen....

i have fitted a set of Tankmodelbau adjusters to a KT belonging to a friend , they have proved reliable and were an easy fit .

I have posted a link to Steve at welsh Dragon who sells them ...

http://www.welshdragonmodels.co.uk/tank ... 1581-p.asp

You will also need the asiatam rear idler wheels with bearings to use the tensioners , also sold by Steve .


Good luck

Do you know if the tension can be adjusted with the tank together, or does the upper hull have to be removed?

Hi,
I got a hentec one from forgebear.
Not cheap but very good & pretty easy to fit

Just remembered, I got it from wdm
Although forgebear sells them aswell

Do you know if the tension can be adjusted with the tank together, or does the upper hull have to be removed?


With the Tank Modellbau set you have to remove the top Hull to access the main nut on the adjuster arm . Hope that helps