RC Tank Warfare community hobby forum

Hi Guy's.....

I have finally managed to get hold of a correct green rear column light for my Tiger 131 build .
It is a Tank modelbau item supplied by steve at WDM , can this be connected directly to the
same curcuit board on the STD HL electrics as the front headlight ?

Thanks in advance

.

With no answer from this forum , i contacted Steve at WDM , his advice was that Tank Modellbau recommend a resistor , but Steve said that many
customers have fitted them direct and have not had any reported problems . I lose connected it to the battery on/off switch and it worked ok .
I may connect the rear column light directly to the on/off switch as a visual reminder that the power is on .