Page 1 of 2
Heng long 1:30 sherman re-vamp
Posted: Thu Apr 18, 2013 11:39 pm
by sean Half-pint works
OK guys this is my first RC tank, but its a SHERMAN (couldn't find a Churchill though

)
Anywho long to the short is she is a 1:30 scale (a lot cheaper than the 1:16's, just in case I didn't take to tanking!) so she is about 22CM end to end (don't ask what that is in inches as i havent got the tape out yet!)
So as you can see, she is very plain and boring, I am debating weather to go down the black and green, or desert colours (britsh 8th army armored division), hmmmm...
She goes well, but I am not fond of the sound system, nor the gun light, but I think I shall use her as a stepping stone, do my thing with the finish, and sell her to help fund a 1:16!
I had a play with her earlier, and she was happilly scaling a plile of hardcore, and although she struggled with a steep piece of brick! I will post some photos of heron the hardcore another time!
One point, does anyone know what other camo colours would have been used on the Sherman M4A3??
Sean
Re: Heng long 1:30 sherman re-vamp
Posted: Fri Apr 19, 2013 6:09 am
by jarndice
Sean, If you want information on the Sherman M4 I would suggest you go to the Referance Websites section, go to subpage 3 and you will get a lead to American Fighting Vehicle Database. there is everything you could want including Camo Patterns.I would recommend using a printer because their is a lot of stuff to take in. Enjoy. shaun
Re: Heng long 1:30 sherman re-vamp
Posted: Fri Apr 19, 2013 10:38 pm
by sean Half-pint works
Many thanks for the heads up on that Shaun, I had a look see, plus on the camo section of this forum, and chasing up a hinted piece of information, and a little further digging led me to my choice, lets see who can guess it! No it is not the obvious 1944/1945 snow camo either!
Please excuse the paint coverage, its its first coat, and I am building up a careworn texture using cotton buds, it took a good hour to do this layer, and probably another 2 or 3 coats to get the finish I have in mind... anywho photos!
Ok, thoughts people?
Re: Heng long 1:30 sherman re-vamp
Posted: Sat Apr 20, 2013 12:43 pm
by lister fiend
there's a nasty flock of seagulls about!
to be honest, my painting skills are whats shit
it looks a bit glossy, is it the flash on the camera?
and a bit too heavy.
apart from that it's alright

Re: Heng long 1:30 sherman re-vamp
Posted: Sat Apr 20, 2013 3:29 pm
by doc larsson
operation torch ?
Re: Heng long 1:30 sherman re-vamp
Posted: Sat Apr 20, 2013 4:34 pm
by MichaelC
Re: Heng long 1:30 sherman re-vamp
Posted: Sat Apr 20, 2013 5:31 pm
by sean Half-pint works
lister fiend wrote:there's a nasty flock of seagulls about!
to be honest, my painting skills are whats shit
it looks a bit glossy, is it the flash on the camera?
and a bit too heavy.
apart from that it's alright

HAHAHA I think its Pigeons rather than gulls here! and they can't be that bad!
I think the glossyness is wet paint an a very potent flash on my camera!
How do you mean a little heavy please, Im having a slow moment!
Doc Larsson, rightish period, but wrong part of the world for what i have in mind
MichaelC I love that image, indeed it has given me some inspiration for the tracks especailly!
Re: Heng long 1:30 sherman re-vamp
Posted: Tue Apr 23, 2013 2:56 pm
by sean Half-pint works
Righty ho guys, its time to get on track (pun intended) with my tracks, I have retained the rubber ones for now, but a mix of paints did this to them, which I am actually quite pleased with in all honesty!
Any thoughts guys?
I will be putting some photos of her up (she is nearly finished after all!)
Sean
Re: Heng long 1:30 sherman re-vamp
Posted: Tue Apr 23, 2013 3:49 pm
by doc larsson
is it a russian based sherman ? Also did the sherman have a muzzle break on it ? I always thought it was the firefly onwards ?
Re: Heng long 1:30 sherman re-vamp
Posted: Tue Apr 23, 2013 4:08 pm
by sean Half-pint works
YAY you got it right
As far as I can tell (and please correct me if I am wrong hear!!!) there were a mix of breaked and unbreaked guns (Is that the right teminilogy??) I intend to remove the break from mine as i think it looks better... but thats just me!