RC Tank Warfare community hobby forum

I will be moving the radio aerial on my Heng Long Panzer 4 but what I need is any tips on what not to do, I want it to be located on the corner of the hull left rear. shaun

just be carefull not to snap the part the aerial screws on to , i have done the same thong & moved the aerial to the left rear corner , tanker 242

Thank you my hero, I just love this place. shaun

are u cutting down the hight of the aerial as well ? iff so add same lenght of wire to the inside connection to make up what u cut from aerial , as i did it looks more to scale & works just as before . tanker 242

i have allso done the same with my tiger 1 & kv1 &moved the aerials to there correct place & cut them down in hight , tanker 242

Thanks for that, fortunately my Tiger1 is a 2.4 Torro so the actual aerial is internal and the scale aerial is already correctly positioned using an ABER aerial kit, but I shall take your advice about my PZ4. somewhere out there a cdm awaits you.! shaun

hi jarndice only to pleased to help a fellow tanker with a problem iff i can . tanker 242