RC Tank Warfare community hobby forum

as far as i know this electric model does not have any engine sound just the noise of the gearbox what do i need besides the speaker as this sort of thing is new and could be complicated any help apprecieated

Benedini sound card is what you need! Maybe an elmod flex with some hefty sabretooth ESC! There's a few options out there. Bet your gutted you missed the metal 1/6 sherm went for 1.5 k on eBay a few weeks ago!

yes missed that one but hadnt he funds at the time thanks for the advice though mate

yes missed that one but hadnt he funds at the time thanks for the advice though mate

mate forget all the other systems out there, if its sounds you want go for benedini as tom says, all us guys in the uktc use benedini even in the 1/4 tigers/panthers, i have the m5a1 fitted with benedini too they sound way better than anything else .

trev

boxerdog wrote:mate forget all the other systems out there, if its sounds you want go for benedini as tom says, all us guys in the uktc use benedini even in the 1/4 tigers/panthers, i have the m5a1 fitted with benedini too they sound way better than anything else .

trev

on a really tight budget trev sold loads of stuff for the new rank how much ive heard the are the best cos they are expensive

you can get the mini bendini board for about £90 i think, add an amp too , they aint cheap but then you get what you pay for, out of all the systems ive used, the sounds are far better than the rest, elmod is another route but then these are not cheap either, the clark board for about £45 is ment to be good too.

trev

clark board????? me likes this price ..easy ty to fit? any links mate

If you use a splinter you can use any multi function unit that plugs into the rx. Clark would work, slu would work. But at £90 benedini is the best

i need more details to im thick you see i know nothing of fitting these systems i.e soundcard etc brainboggling mate