Taigen Tiger 1 Full Metal RX18 with Lipo - Wiring change ?
Posted: Wed Feb 27, 2013 12:58 pm
Hello fellow Tankers,
Maybe you can help me out, I recently purchased a 2.4Ghz Taigen Full metal upgrade Tiger 1 with RX18 onboard.
I have a few 2S2P 40C 5000 mah Lipo's from other RC stuff and I have been reading on this forum that is should be possible to directly connect the 7.4 V lipo to this 7.2 V RX18 system.
But there is one thing I cannot find and that is :
Do I have to change the thickness of the electric wires or can I directly use it on the OEM wiring and is it necessary or advisable to attach a fuse in between the RX 18 and the Lipo ?
Greetings.
Maybe you can help me out, I recently purchased a 2.4Ghz Taigen Full metal upgrade Tiger 1 with RX18 onboard.
I have a few 2S2P 40C 5000 mah Lipo's from other RC stuff and I have been reading on this forum that is should be possible to directly connect the 7.4 V lipo to this 7.2 V RX18 system.
But there is one thing I cannot find and that is :
Do I have to change the thickness of the electric wires or can I directly use it on the OEM wiring and is it necessary or advisable to attach a fuse in between the RX 18 and the Lipo ?
Greetings.