RC Tank Warfare community hobby forum

Thank you mate
Yeh i was looking for a secure type fixing for the schuzren so screws it was
Hopefully get out with her this weekend or early next week as i have 4 new tanks to run outside lol

We ll done and fantastc!

thanks mate

Looks great. I would replace the screws with m2 bolts.
The screws kind of look out of place, and spoil an otherwise excellent model.

Cheers mate
I think its 1.4 screws i used and m2 bolts would be to big but will think about it

Stormbringer wrote: ↑Fri Oct 10, 2025 1:32 pm Cheers mate
I think its 1.4 screws i used and m2 bolts would be to big but will think about it

Ah! I assumed (incorrectly) that you had used m2 screws, as you mentioned m2 washers. My apologies.

No worries mate
yeh i did use m2 washers but luckilly the screwheads dont slip through the washers
I will have a look and measure the screws and see if i can get bolts appropriate size

Ok i gave the rear and sides of her a wash of Vallejo chocolate brown
Concentrated more on the bottom and back and hopefully when sprayed with a matt coat that should hopefully be her (till i find something else lol)

Stormbringer wrote: ↑Wed Oct 22, 2025 7:31 pm Ok i gave the rear and sides of her a wash of Vallejo chocolate brown
Concentrated more on the bottom and back and hopefully when sprayed with a matt coat that should hopefully be her (till i find something else lol)

Just a friendly warning. This is exactly how I started not too long ago.

It tends to snowball..

Warning heeded mate but i think i am already on that slippery slope