Page 9 of 11
Re: Tongde Churchill MK VII
Posted: Tue Apr 02, 2024 2:27 pm
by ColemanCollector
Whoa! I'm not fan of Churchills, but I'd get that one!
Good on Tongde for hopping off the path well travelled.
Mike.
Re: Tongde Churchill MK VII
Posted: Tue Apr 02, 2024 5:16 pm
by RobW
Kaczor wrote: ↑Tue Apr 02, 2024 9:45 am
I hope for after market mods with Mark III and IV turrets and other bits.
I think there are a variety of extras coming from various places. Turrets being one of them.
Re: Tongde Churchill MK VII
Posted: Tue Apr 09, 2024 8:35 pm
by PainlessWolf
Good Afternoon,
I'm hanging on and waiting for Dave and Julie to bring some in. I know we will get the best specimens from those folks and the widest range of accessories.
regards,
Painless
Re: Tongde Churchill MK VII
Posted: Sun Apr 14, 2024 10:50 am
by jhamm
Hello,
today I found time to inspect the Churchill in detail.
I noticed that the hull is not completely closed.
There is a gap of approx. 6 mm on each side.
A lot of sand etc. is being transported inside through the chains....

- Churchill Mk.VII 14042024-007.jpg (48.15 KiB) Viewed 1825 times

- Churchill Mk.VII 14042024-006.jpg (95.01 KiB) Viewed 1825 times

- Churchill Mk.VII 14042024-005.jpg (143.71 KiB) Viewed 1825 times

- Churchill Mk.VII 14042024-004.jpg (255.04 KiB) Viewed 1825 times

- Churchill Mk.VII 14042024-003.jpg (259.72 KiB) Viewed 1825 times

- Churchill Mk.VII 14042024-002.jpg (263.5 KiB) Viewed 1825 times

- Churchill Mk.VII 14042024-001.jpg (241.03 KiB) Viewed 1825 times
Re: Tongde Churchill MK VII
Posted: Sun Apr 14, 2024 12:57 pm
by Kaczor
It moves well "straight out of the box". I'm going to replace the electronics in mine with Beier. Still a few weeks of waiting (bought via rctank.de).
Re: Tongde Churchill MK VII
Posted: Sun Apr 14, 2024 1:28 pm
by jhamm
Kaczor wrote: ↑Sun Apr 14, 2024 12:57 pm
It moves well "straight out of the box". I'm going to replace the electronics in mine with Beier. Still a few weeks of waiting (bought via rctank.de).
I will do the same, an SFR-1-HL should be sufficient.
Re: Tongde Churchill MK VII
Posted: Sun Apr 14, 2024 4:28 pm
by Panzer Fenris
That gap right next to the tracks is quite concerning.
I to tend to run my tanks pretty hard and off the beaten track, and that is just asking to have mud or snow conveyed straight into the interior.
Fortunately it looks like it shouldn't be too hard to build up the bottom tub with plasticard and close it off that way.
Re: Tongde Churchill MK VII
Posted: Wed Apr 24, 2024 8:34 am
by Kaczor
Re: Tongde Churchill MK VII
Posted: Wed Apr 24, 2024 4:15 pm
by Herr Dr. Professor
Kaczor, the TongDe Bradley also shows a gap, and I am wondering if I have the right idea to fix it. Please see my third post at
viewtopic.php?p=354894&hilit=Bradley#p354894:
Re: Tongde Churchill MK VII
Posted: Sun Apr 28, 2024 5:42 pm
by jhamm
Hi,
after some modifications and swap the Tongde TK 2.0 elektronics ouf for Beier SFR-1-HL: