Re: Panther Gs Detail upgrades
Posted: Tue Jul 24, 2018 6:57 pm
Thank you Xrad, my reference tank only has one, though.
RC Tank Warfare community hobby forum
RC Tank Warfare community modelling hobby forum
https://www.rctankwarfare.co.uk/forums/
Panther Gs Detail upgrades
https://www.rctankwarfare.co.uk/forums/viewtopic.php?t=23958
Page 9 of 24
Re: Panther Gs Detail upgrades
Posted: Wed Jul 25, 2018 12:00 am
My mistake. I was thinking of the King Tiger!
Re: Panther Gs Detail upgrades
Posted: Fri Jul 27, 2018 4:02 pm
Howdy. Before moving to the next steps I took care of the hull deck features. The brackets for the wooden blocks that act as stops when the hatches are opened were part of the voyager set. A feature I was missing on the 1/16 Panther were the two weld lines on the deck around the turret ring. Just scribed channels in where these are supposed to be and weld lines added with Vallejo Putty. Some Mr Surfacer to blend everything together. 
Gesendet von meinem SM-G900F mit Tapatalk
Gesendet von meinem SM-G900F mit Tapatalk
Re: Panther Gs Detail upgrades
Posted: Sun Jul 29, 2018 11:43 pm
Progress on the side details. Couldn't yet find a proper tool to make the front hatch bolt detail.
The side detail is beefed up a bit, because the yoyager pe is rather thin with .3mm and what I saw on the Munster tanks, the tickness of details like the tool or space track racks is more like 1-2 cm. So anything between 0.8-1.3mm should be fine. Here is a shot of the track hangers.
Gesendet von meinem SM-G900F mit Tapatalk
The side detail is beefed up a bit, because the yoyager pe is rather thin with .3mm and what I saw on the Munster tanks, the tickness of details like the tool or space track racks is more like 1-2 cm. So anything between 0.8-1.3mm should be fine. Here is a shot of the track hangers.
Gesendet von meinem SM-G900F mit Tapatalk
Re: Panther Gs Detail upgrades
Posted: Tue Jul 31, 2018 9:33 pm
Put some primer down today. The various details look much more like belonging together now. The grills look really nice too.
Gesendet von meinem SM-G900F mit Tapatalk
Gesendet von meinem SM-G900F mit Tapatalk
Re: Panther Gs Detail upgrades
Posted: Wed Aug 01, 2018 1:25 am
Soeren this looks like the real thing!
Re: Panther Gs Detail upgrades
Posted: Wed Aug 01, 2018 1:47 pm
Thank you Carl 
Gesendet von meinem SM-G900F mit Tapatalk
Gesendet von meinem SM-G900F mit Tapatalk
Re: Panther Gs Detail upgrades
Posted: Fri Aug 03, 2018 11:52 am
Now that most of the side details are on it is time to move towards the fenders. I thought it would be easier to do on a proper support. So I went with the Taigen lower and a set of Panther steel wheels, that I would like to try for another look
Gesendet von meinem SM-G900F mit Tapatalk
Gesendet von meinem SM-G900F mit Tapatalk
Re: Panther Gs Detail upgrades
Posted: Sat Aug 04, 2018 8:26 am
A quick note on the Voyager PE. While it is easier to work with compare to ABER, it is also quite thin, but the pre cut grooves for bending are wide and deep and tend to break during adjustments. So it is a good idea to run down a line of solder along these to strengthen them. So far it works fine.
Gesendet von meinem SM-G900F mit Tapatalk
Gesendet von meinem SM-G900F mit Tapatalk
Re: Panther Gs Detail upgrades
Posted: Sun Aug 05, 2018 9:27 am
Good morning. Finally made one side of the fenders. The front end gets a few supports and should be stiff enough. The sides should get some reinforcements to be more durable for the extended handling during rc use. Still a useful detail upgrade. The bolts are from Knupfer. 1.5mm heads 1mm high, sanded down for a better look.
Gesendet von meinem SM-G900F mit Tapatalk
Gesendet von meinem SM-G900F mit Tapatalk