.....

[brizo58]

Hi canned,
Right you will need
1.gun recoil unit. Because the105 has not got one
2.turret ring gear. Because the 105 one is the wrong shape
3? E sprue if you don't already have it?
4. Small return spring for gun elevation unit. This is in the machine gun bag
5. Turret roller kit
Hope this helps I went over the M51 instructions and ordered them from ALEXS. They all came this morning. Regards, Brian...

[brizo58]

Hi,
Yea the turret motor will fit but you have to make 3 posts up. What I have done is the old 105 top hull
I fitted the motor to it and razor saw the posts off also you have to get the three posts off that hold the turret rollers 3of them again saw the 3posts from the 105 hull. A lot of work but worth it in the long run.Brian

[tomhugill]

Stu have you any hl rotations? The one in mine works lovely.

[cannedheat]

there is always a obstacle in the way. it seems as I am not to have a m51 any one know what that bracket is for
?.......dave turret ring tom the h,l turret ring ?

[tomhugill]

Have you downloaded the tamiya instructions stu?

[cannedheat]

Have you downloaded the tamiya instructions stu?

no tom tried to find but no luck tried tam site but every time I down load something all we get is is some message to look to internet to open files ete just not got the patience

[tomhugill]

downloads/download.php?file=6&hash=968758aa

Happy xmas All the tamiya manuals are on here in the download section.

[brizo58]

Hi
The bracket is the recoil motor bracket screws to the gun mantle. And all the manuals are on the tamiya USA site. Brian...

[brizo58]

Hi canned,
I have listed all the parts you need at the top of this page!! To Finnish the M51 turret.
Best Regards, Brian...

[cannedheat]

downloads/download.php?file=6&hash=968758aa

Happy xmas All the tamiya manuals are on here in the download section.

tried it cant down load