Ludwig/ Heng Long King Tiger E-100 build

[mustclime]

Well been working through the dead of winter on the e100.....30 degrees in my work shop....pulled the wheels and got them ready for paint...



made up the speaker box with one of Phil's Sony speakers.....



next was setting up the turret so it works with the Clark "real recoil"....time to build the frame that will mount the servo and hold the gun...









and the test.....



it works great!.....next I hit a wall.....silly me I assumed that if the board was going to use a tamiya apple, then the tamiya apple mount and ir light would just plug in....





nope....the apple mount needs a heng long style 5 pin plug and the Ir light needs a very small 2 pin plug.....both of witch Clark sells sepretly.....great......for some reason I can not get onto the clark site....checked everything, think its my internet previder limiting bandwidth or something...this is my third suprize with clark. I am really upset with these guys.....anyone have some another sorce for the plugs and the clips that go inside them? Really thinking about just going with tamiya.....

[jukebox]

Terrific build, looking forward to seeing some video of this! Regarding the connectors for the IR apple and LED, try a flea-bay search for micro JST connectors, although you might have to buy a bag of 50!

[mustclime]

Ok, back again....getting my butt kicked by the clark board.....here is the gun set up with the hl flash upgrade and real recoil...



next I started working on the gun elevation....using hl stug units....I started by froming things up on the bottom of the turret....







when I plugged everything togather, everything works but the elevation....









and guess what doen't work.....the elevation...



its getting some voltage....like .25-.29 volts but it does not move.....I am getting the sound out of the clark when it should work....I am stumped....any ideas?

[mustclime]

Back at it....my desktop computer picked up something from all those job sites and ate its self so that was a full day a half gone fixing it....what a mess....
The hatches that came with the kit do not match anything and they are completly bare.....so out came the hl hatches I had from the doner tank...



cut the cover plate for the hinge....





I will add some texture and they will be done....next was the 75mm above the 128mm main gun....I am using the 75mm as my mount for the IR light so I wanted it to be well allined with the main gun.....I used a tube that the ir light and tube will fit into and glued it in so it would be well alined....



next on my hit list are the fender cranes for lifting those huge fenders up onto the tank after transport, I figured they would be carried on the tank as any track work would require the fenders to be pulled....I am also making pullies for them...





here is what they look like on the tank...







here is a drawing I found on wot as how they would have worked....mine are a little different....

[mustclime]

Back again....my mancave has been really cold(teens) so work has slowed down....here are some shots of the cranes,,,note the failed tiger hatch with a shell discharge hatch....



note the track hangers and the staples I use to make them....







next was the fake tracks I made out of the kt tracks...they are not "correct"





note the shoe goo cap I modded to get thin streams of goo...kinda proud of that one, works great....now the rear turret hatch with the shell discharge hatch....









why do I do all this work?....this is why...







almost ready for paint......

[mustclime]

Well after 2 bottles of tamiya paint.....here it is with the base coat....







now to decide on the pattern....

[mustclime]

Well, I have been painting and painting and painting.....decideded on going with something like the E-100 in this....



still sorting the tank.....lubing the wheels...



installing the starter switch and speaker knob...



adding the numbers and alike....





more details

















Ended up doing a lot of black wash, I figured that driving through fields of burning T34's would tend to leave the tank covered with more black run off than white....of course My elevation unit ate its self before I got much of a drive so the turret needs some work and the IR light in the 75mm gun tube does not seem to be lighting up when the gun is fired( have to figure that one out as this is my first clark board tank) ....I also plan on adding some battle damage.....so here is the peak at what she looks like....before she is totaly sorted....

[mustclime]

What does a rc tanker do when he gets snowed in in a blizzered?....he drives his tank.........











out into the snow( 15 inches worth)


















yes my shoe gooed tracks work great.....

[Koubiak]

Good job Mustclime

[Red Devils]

Great looking tank mustclime, very impressive...

Derek