3D printable Jagdpanzer 38(t) Hetzer

[Max-U52]

One of the guys here modified a HL smoker, cutting off the pump and using a fan, and it's much, much smaller than a stock unit, so that might be of use to you.

[Will01Capri]

One of the guys here modified a HL smoker, cutting off the pump and using a fan, and it's much, much smaller than a stock unit, so that might be of use to you.

Good idea. Link or pictures?

[Son of a gun-ner]

One of the guys here modified a HL smoker, cutting off the pump and using a fan, and it's much, much smaller than a stock unit, so that might be of use to you.

Good idea. Link or pictures?

Here ya go Will

HL smoker pump replaced with a fan - RC Tank Warfare
viewtopic.php?f=38&t=22406&hilit=Smoker

[Cozin54]

Love it you have done a great job on her

[50koruny]

Thank you very much.

I dont want to remove this pump from the Heng-Long generator.I need to preserve low profile of the generator.I think this pump is a nice simulator of the old engine burning cycle.
I have changed only this stock coil for this.
Pictures are not my work.This photos belongs to the author of the coil and one of the core members of the Czech RC tank forum.
So i have changed this coil and separated connectors so i have 2x2 pin connectors on this.I like to use proportional smoke controls of the Elmod.

[Will01Capri]

Thank you, both.
I have figured out how to put sound and smoke inside.Its enough space inside, but i dont have confirmed this overlay with gun installed.
My bad.I am not able to install gun because i need this bearings from the last delivery.
Seems to be almost impossible to fit TARR smoke generetor (i love TARR) so i keep going with (almost ) stock Heng-Long smoke.

Its really fun to drive this.This Hetzer seems to be great runer.Just need to tune up this Elmod a little bit.

phpBB [video]

Just seen the video. Oh Wow. That runs smooth. Nice work. Well engineered.

[50koruny]

Thank you very much.
I am pretty happy with result.
Only problem of this build seems to be poor accessibility of the driving wheels axle.

I have thinked about the selling the kits today.I think i can run my printer more frequently and start to make a small number of kits.
I am lazy, i think i can make a little bit more

[c.rainford73]

I'd gladly purchase one Such a nice running tank

[50koruny]

Nice from You.
What do You think is acceptable price for something like this?I dont have idea for now, but i definitely want to make this price acceptable for both sides.

[midlife306]

I’d gladly pay for the STL’s
Cheers
Wayne


Sent from my iPhone using Tapatalk