RC Tank Warfare community hobby forum

I have the new can of paint, just not had the weather to paint outside. Hopefully today, it's only a few bits that need painting.

After its painted I'll be removing all the masking tape from the periscope devices and attaching the smoke discharger caps

Hatches painted and fitted and masking tape removed from the periscopes and rangefinders etc

Discharger caps fitted.

Smokey exhaust outlets and barrel done.

Thanks Simon

No purple tape here - may use some orange identification panels though like my Hummer has.

They were a complete pain in the bum! Wrong size staples to start, had to get some more smaller ones and then off I went for a couple of hours!

Going to attempt to paint some tools and then sort some weathering out.

Desert buddies

Look at the size of the Leopard compared to the Tamiya Tiger I!

Spent some time tonight making the figures for the Leopard.

In the Tamiya kit you get a standing figure and a half one for the turret.
Seeing as the standing one is useless I decided to pinch some arms off another figure and test glue them to his torso.

Success - with some re molding I can have two turreted figures or a driver and a commander.'

Thanks Paul, you know I'm gonna give them to you tomorrow lol

Check this out:

https://www.varusteleka.com/en/product/ ... -used/3137

Let me know - I could do them but seeing the job you did in the Chinese ones...