Re: Bristol Armoured Division
Posted: Wed Jun 14, 2017 9:02 pm
I have known Dave for a looooong time. 
RC Tank Warfare community hobby forum
RC Tank Warfare community modelling hobby forum
https://www.rctankwarfare.co.uk/forums/
Bristol Armoured Division
https://www.rctankwarfare.co.uk/forums/viewtopic.php?t=14381
Page 64 of 111
Re: Bristol Armoured Division
Posted: Thu Jun 15, 2017 6:18 pm
Excellent move Rob... and great advertising
Re: Bristol Armoured Division
Posted: Fri Jun 16, 2017 11:40 am
Finally worked out my connectors, made a little list for people to find the right ones.
Tamiya Battle System/Elmod port 3 - JST PH 2.0mm 5 Pin
Clark Board/Elmod Ports 1,2,5,6,7,8,10,13 - JST-XH 2.5mm (X) Pin (all the same type just adjust pin number X)
Servos - JR connector 3 pin
2 pin Connectors eg:Elmod Lights - DuPont 2 pin
all those can be shoved in ebay and chuck up the right connectors in the list.
Finished Wooleys tank tidy ups this week, now on to the Panther for Ed
Tamiya Battle System/Elmod port 3 - JST PH 2.0mm 5 Pin
Clark Board/Elmod Ports 1,2,5,6,7,8,10,13 - JST-XH 2.5mm (X) Pin (all the same type just adjust pin number X)
Servos - JR connector 3 pin
2 pin Connectors eg:Elmod Lights - DuPont 2 pin
all those can be shoved in ebay and chuck up the right connectors in the list.
Finished Wooleys tank tidy ups this week, now on to the Panther for Ed
Re: Bristol Armoured Division
Posted: Fri Jun 16, 2017 12:52 pm
And don't they look glorious.....Yojo wrote:
Finished Wooleys tank tidy ups this week, now on to the Panther for Ed
Re: Bristol Armoured Division
Posted: Fri Jun 16, 2017 6:28 pm
Very nice ...
Re: Bristol Armoured Division
Posted: Tue Jun 20, 2017 10:48 am
Very nice job on the zimmeritt, and yes, they do look glorious! 
Re: Bristol Armoured Division
Posted: Tue Jun 20, 2017 12:56 pm
Suoer job 
Re: Bristol Armoured Division
Posted: Mon Jun 26, 2017 12:50 pm
Hey all what was the 3D Printing program for Figures we talked about last meet, as I have a few spare eavnins coming up and was gonna have a play with posing some people for you.
Re: Bristol Armoured Division
Posted: Mon Jun 26, 2017 5:03 pm
Take a look at page 30 of this thread, and you should find all of the software listed. If you can come up with a solution, you will have Godly status.
Re: Bristol Armoured Division
Posted: Tue Jun 27, 2017 12:31 pm
ah I missed that post, usal blindness, I have s6tarted having a play around, I can now make custom poses for Make Human so thats a step, but I see what you mean with the mesh problems, will have a play around, worst case I will see if I can remember how to 3d model from scratch again, what specificity would people prefer first, British, German, Soviet?