BTR-152 3D printing 1/16

[Snipermadrid]

Hi Pavel!
Thanks for the information.
The model you bought is this.
https://www.turbosquid.com/3D-Models/3d ... rral=3dmdb

[Pavel]

No, no, what are you, this is a wonderful model, it looks like I have it for 5 bucks, and it's still badly printed ...

[Snipermadrid]

It is the only one that looks like the model of all those that appear on the page that I provide.
The one with the windows and doors that are similar to the model you printed.
If not this which one is it?

[Pavel]

I don't know, but the manufacturer says that if he says he'll have to kill me.

[Snipermadrid]

I ask because I'm interested in making one based on Syria or Iraq, including Lebanon.
I don't think they keep him for giving that information and if not privately in the strictest of secrets.

[Pavel]

The master does not say what files he used, this is his business ....
My armored personnel carrier had doors without hinges, yours had them at the link, and there are many more differences ...
Maybe the master finalized the model ... or based on it he made his own version .....
He does a lot himself
https://vk.com/feed?w=wall-161519187_14699_r14706

[jee]

The master does not say what files he used, this is his business ....
My armored personnel carrier had doors without hinges, yours had them at the link, and there are many more differences ...
Maybe the master finalized the model ... or based on it he made his own version .....
He does a lot himself
https://vk.com/feed?w=wall-161519187_14699_r14706

Thanks for the cool link

I see the real ones driving around here from time to time, most of the time they block the road but I once almost hit one which was driving awefully slow.

[Snipermadrid]

The master does not say what files he used, this is his business ....
My armored personnel carrier had doors without hinges, yours had them at the link, and there are many more differences ...
Maybe the master finalized the model ... or based on it he made his own version .....
He does a lot himself
https://vk.com/feed?w=wall-161519187_14699_r14706

Hello!
Sorry but I understand your words lol.
Other question the link no found.
Thank you.

[Pavel]

Purchased set has been installed....
But......
The supplier gave only three parts, but you need 4 (four)
The intermediate cardan is too long, I had to cut it and shorten it ....
These covers are designed for a different way of the through bridge and even have gears, but I repeat there is not one bevel gear, for this option ...
but I had a stock set, I used the covers as a donor and one gear, it almost fit into the gearbox.
In principle, it’s impossible to simply take and put an upgrade on a 6x6 chassis ..... if you don’t have the tools ....

Here is an option with covers from the kit, but there is no bevel gear .... fourth ....

[Pavel]

I assembled what they recommend with donors from the stock kit, cut the existing shaft to the right size ...
I installed plastic bushings.
After all, in a set of metal bearings are not enough ....
As a conclusion .... we were deceived .....