RC Tank Warfare community hobby forum

RC Tank Warfare community modelling hobby forum
https://www.rctankwarfare.co.uk/forums/

How to build a working IR Artillery Gun

https://www.rctankwarfare.co.uk/forums/viewtopic.php?t=22849

Page 7 of 7

Re: How to build a working IR Artillery Gun

Posted: Mon Aug 20, 2018 6:02 pm
by sateng
The battlesystem works very well!
I figured out that the flash only would work at first shot. It is the original taigen flash wired up as shown in your eagle drawing.
Any advice where I made a mistake?

Gesendet von meinem SM-G930F mit Tapatalk

Re: How to build a working IR Artillery Gun

Posted: Mon Aug 20, 2018 6:29 pm
by sateng
Sorry forget about this post.
I swapped LOW and HIGH states for muzzle flash in Tank.cpp
It seems they use a different transistor in the flash Unit than it was programmed for.
sateng wrote:The battlesystem works very well!
I figured out that the flash only would work at first shot. It is the original taigen flash wired up as shown in your eagle drawing.
Any advice where I made a mistake?

Gesendet von meinem SM-G930F mit Tapatalk
Gesendet von meinem SM-G930F mit Tapatalk
All times are UTC+01:00
Page 7 of 7

Powered by phpBB® Forum Software © phpBB Limited