RC Tank Warfare community hobby forum

FoolProofMike12 wrote: ↑Tue Oct 14, 2025 4:56 pm

jee wrote: ↑Tue Oct 14, 2025 8:46 am

FoolProofMike12 wrote: ↑Tue Oct 14, 2025 8:26 am

Yep, I will update when cults reach me to settle down

very good, just let me know

Resolved, I talked with the designer he removed both

Good you got it resolved. Could the designer just release the files as a conversion with only his files? Not trying to start a controversy, just looking for a compromise. I know it would chap my rear end if someone stole my IP like that.

1/10 T-55

https://cults3d.com/en/3d-model/game/t-55-rc-tank-1-10

tankme wrote: ↑Tue Oct 14, 2025 11:38 pm 1/10 T-55

https://cults3d.com/en/3d-model/game/t-55-rc-tank-1-10

Thanks!

Art Hogus wrote: ↑Mon Oct 13, 2025 9:40 am

Edumardo wrote: ↑Mon Oct 13, 2025 8:16 am Panzerjäger 1 SdKfz. 101 "Ente" Scale 1/10: https://cults3d.com/en/3d-model/game/pa ... z-101-ente

19.jpg

Wow! Nice model, thank you for the link. It would also be nice to have Panzer 1 and II in 1/10.

The new Ente & earlier Kleiner Panzerbefehlswagen are modeled exactly to scale so you'll find many of the thinner parts difficult to print on an FDM printer so recommend all but the hull, structural & working parts to be done in resin for best results. I've given up trying to print mud guards & other parts since it's scaled exactly the same as the actual tank.
Regarding the Pz II, there will be a new 1/10 model & several variants coming early next year from another well-known designer. I took over 120 photos of the Ausf F at Bovington 2 weeks ago for him. If you don't to wait, Incor's 1/16 model can always be scaled up but this new model will offer better detailing.

Xiaoshan_Sailor wrote: ↑Fri Oct 17, 2025 8:04 am

The new Ente & earlier Kleiner Panzerbefehlswagen are modeled exactly to scale so you'll find many of the thinner parts difficult to print on an FDM printer so recommend all but the hull, structural & working parts to be done in resin for best results. I've given up trying to print mud guards & other parts since it's scaled exactly the same as the actual tank.

I can see it from the assembly guide , a lot of nice and small details, including suspension.

Regarding the Pz II, there will be a new 1/10 model & several variants coming early next year from another well-known designer.

It's awesome! I can wait, already got a stash of the models in 1/10 to build, enough for a few years.

that panzer II will be cool

I can relate - keep telling my better half I'm stocking up for retirement but am sure she's convinced I'll take them into the afterlife.

The gent from Belgium who released the Sd.Kfz.265 & 101 has an M3 Grant that I recommend since it's well thought out. It's his first design & didn't come with a proper manual at first but that's since been updated. I have most of it printed but boxed up for a winter project.

Xiaoshan_Sailor wrote: ↑Fri Oct 17, 2025 8:46 am I can relate - keep telling my better half I'm stocking up for retirement but am sure she's convinced I'll take them into the afterlife.

The gent from Belgium who released the Sd.Kfz.265 & 101 has an M3 Grant that I recommend since it's well thought out. It's his first design & didn't come with a proper manual at first but that's since been updated. I have most of it printed but boxed up for a winter project.

you have enough printers to fnish any model that will be released

By the way, he started now with the SPA TL 37, Italian 4wd and 4 wheel steering car, very cool project

Come on, I only have 3 Bambu & planning to get an H2S early next year once the updates are out.

Cool, good to hear about the SPA TL 37. Need more Italian in our diet.