Naw son, just get you one of theseDeathcrusher wrote: ↑Fri Sep 12, 2025 9:51 am Thank you soooooo much, it is probbaly easier for it to be posted. But im wondering will i just need to buy a board with 2 power sockets, 1 for the smoke from the barrel and 1 for engine?
https://ebay.us/m/GvCEiT
It doesn’t have to be this one, you just need a JST XH 2.54 Y split with one male head and two female heads like the one in the link. Googling dual fan Jst XH Y split may reveal some good results as well.
Just make sure whatever you get that the polarity of the wires is the same, i.e. red goes into the red, black goes into black. If it doesn’t come this way the pins in the plugs can be removed with a small metal pick or tiny flathead screw driver.
Then you just turn all smoke on or off with the regular smoker button.
Alternatively you could buy a HL TK 7.1 (can’t remember if the 7.0 has an extra power slot for smoke/FPV, but I think it does), but you’ll have to do a bit of rewiring to make it work. However, the HL MFUs have excellent speed control compared to the Taigen V3. The trade off is the sound isn’t as nice and you lose the ability to use an aftermarket transmitter if you want.
If one day you decide to open the turret I would love to see pictures of how they connected the gun smoke mod. Since that plug provides power to the unit, I’m guessing there’s a gun smoke control card stuffed up in there.
most of us dont like or use them.
