Re: 1944 'Elefant' by Hooben
Posted: Wed Jul 27, 2016 9:15 am
Thanks Shaun just been looking at the FS-TH-9X very nice think I'll have that one 
. Brian...
. Brian...
. Brian...RC Tank Warfare community hobby forum
RC Tank Warfare community modelling hobby forum
https://www.rctankwarfare.co.uk/forums/
1944 'Elefant' by Hooben
https://www.rctankwarfare.co.uk/forums/viewtopic.php?t=19781
Page 6 of 6
Re: 1944 'Elefant' by Hooben
Posted: Wed Jul 27, 2016 9:24 am
Changed me mind I'll go for the Turnigy 9X looks far better and the RX is only £9 . Brian...
. Brian...Re: 1944 'Elefant' by Hooben
Posted: Wed Jul 27, 2016 9:48 am
If you can find a Turnigy 9x then that would be my first choice,
As you noticed it is much cheaper but it was superseded by the 9xr so I am surprised you have found one,
Shaun.
As you noticed it is much cheaper but it was superseded by the 9xr so I am surprised you have found one,
Shaun.
Re: 1944 'Elefant' by Hooben
Posted: Wed Jul 27, 2016 10:05 am
Dont forget you need either an extra board or super precise soldering to flash software in the stock turnigy 9x!!! The Turnigy 9xr does not exist anymore. Now you have the turnigy 9xr pro, which is way superior to the plain 9x.
It has sound, haptic, can play music, voices, lets you add plenty of 3 position switches, replace a pot for a 6 pos switch etc etc
It has sound, haptic, can play music, voices, lets you add plenty of 3 position switches, replace a pot for a 6 pos switch etc etc