RC Tank Warfare community hobby forum

Well while contemplating drilling all those holes I've looked at the "retainers" that secure the Reactive Tiles, these pieces.





Here are the results of my first attempt. This one is the prototype and I used it to work through the pieces and tooling needed. I now need to make 34 of them. Each is made up of 4 pieces soldered together. There will also be 2 bolts and washers along with the retaining pin. Not to sure about the keeper chain that attaches them to the tank.....yet!








TAFN,
BArry

Barry I applaud your efforts and skills but at this rate there will certainly be a brass shortage here in the states this is incredible

I wonder if this still count into the HL.build section. To me it looks like a scratch build with a HL mould underneath to aid you in placing the parts at the correct location. Please keep it up it is a pleasure to follow along.

Mick, Carl, Soeren,

Thank you gentlemen for you kind words. It takes about an hour to fabricate each one.

Barry

Whoot?! Whenever mr P Wolf looks for another Tank commander, you could apply

Soeren wrote:Whoot?! Whenever mr P Wolf looks for another Tank commander, you could apply

Yeah................"Crazy Joe" got nothin on "Crazy'er- Mr Barry C"

You guys are too much!!

Barry

Barry where did you source those lovely rear tow shackles of the Abrams.

Hi Carl,

Prime-Miniatures in the UK, first class customer service! https://prime-miniatures.co.uk/catalog/ ... t-shackles

Barry

Barry a big thank you I will check it out