Page 5 of 7
Re: Leopard 1 A4 R/C Tank 1/12 scale scratch build
Posted: Fri May 11, 2012 11:05 am
by crazark
Hi Hein,
wow your tank looks superb...now i'm digesting the pics.. hmmmmmmmm
Re: Leopard 1 A4 R/C Tank 1/12 scale scratch build
Posted: Sun May 13, 2012 10:32 am
by Hein SA
Re: Leopard 1 A4 R/C Tank 1/12 scale scratch build
Posted: Sun May 20, 2012 6:21 pm
by Andy in Cheltenham
What was your total cost? It looks great.
Re: Leopard 1 A4 R/C Tank 1/12 scale scratch build
Posted: Sun May 20, 2012 8:29 pm
by Hein SA
Hi Andy!
It was around R3500.. Thats about 265 pounds

(paint, wood, 2x drills, chain, 36 bearings(some salvaged), glue, 4x servos and reseiver(without the radio) and a generous neighbour suplied the plastics

)
Re: Leopard 1 A4 R/C Tank 1/12 scale scratch build
Posted: Fri May 25, 2012 8:38 pm
by Hein SA
Re: Leopard 1 A4 R/C Tank 1/12 scale scratch build
Posted: Thu May 31, 2012 5:36 am
by Tiny Tank
Hi Hein SA
That is a magnificent tank that you made. Are the screws that are holding the track pads on countersunk? If not, you should give it a try so the screws don't get grinded down from long use. Just be sure to not countersink the pads to far or you will have to start a new one.
Re: Leopard 1 A4 R/C Tank 1/12 scale scratch build
Posted: Thu May 31, 2012 11:53 am
by Hein SA
Hi Tiny Tank
Thanx

! I did not countersink the pads, the allen key bolts are just screwed on tight that they pull into the plastic quite a bit. I have tried to countersink the pads but the drill or cuontersink bit tends to "bite" into the plastic resulting in a cuontersink that is too beep so didnt bother... The screws do get grinded down but only when neutral turning on abrasive surfaces

Re: Leopard 1 A4 R/C Tank 1/12 scale scratch build
Posted: Sat Jun 02, 2012 9:13 am
by Hein SA
Re: Leopard 1 A4 R/C Tank 1/12 scale scratch build
Posted: Sat Jun 02, 2012 6:56 pm
by Olifant
Well done Hein.
There 3 other 1/16 scratchbuild models on this site from Durban.
Cheers
George
Re: Leopard 1 A4 R/C Tank 1/12 scale scratch build
Posted: Sat Jun 02, 2012 7:50 pm
by Hein SA
Hallo George
Dankie man!
Haha Het nie gedink dit sal sommer gebeur nie..

Waar kan ek die 3 modelle vind?