RC Tank Warfare community hobby forum

hi guys update the parts list for the t55 as is

?6602-T55 ?
?6602-T55 Part List
?? ?? ?? ?? ??
Description Specification Material Quantity Remarks
??Injection parts
???upper hull ABS 1
???lower hull ABS 1
???turret ABS 1
?turret base ABS 1
??A part A sheet ABS 1
??B part B sheet ABS 1
??C part C sheet ABS 1
??D part D sheet ABS 1
??E part E sheet ABS 1
??F part F sheet ABS 1
??G part G sheet ABS 1
??a fuel drum a ABS 2
??b fuel drum b ABS 2
???road wheel ABS 20
??outside wheel ??rubber 20
???gun cover PVC 1
??b gun barrel b nylon 1
??gun mount nylon 1
??track nylon 2 Assembled
??Die-casting
???torsion block L ???zinc alloy 5
???torsion block R ???zinc alloy 5
?????suspension arm A ???zinc alloy 6
?????suspension arm B ???zinc alloy 4
???suspension arm C ???zinc alloy 2
???Idler wheel ???zinc alloy 4
???A drive sprocket A ???zinc alloy 2
???B drive sprocket B ???zinc alloy 2
????limiter L ???zinc alloy 5
????limiter R ???zinc alloy 5
?long damper ???zinc alloy 4
?short damper ???zinc alloy 4
?long arm for spotlight ???zinc alloy 1
?short arm for spotlight ???zinc alloy 1
???Stamping Parts
???shelf of elevation system ???galvanization iron 1
???NC lathe Parts
??a gun barrel a ?aluminum 1
?idler wheel axle ???nickel plated on steel 2
?road wheel axle ???nickel plated on steel 10
?drive sprocket axle ??brass 2
???wheel axle ??brass 12
??Spring
???spring of road wheel L ??0.8mm steel wire 5
???spring of road wheel R ??0.9mm steel wire 5
?????E-ring suspension arm ??0.10mm steel wire 10
???spring for barrel elevation 3x15mm ??0.11mm steel wire 1
???Gearbox
?main gearbox 1 ??assembled with motor
????turret rotation gearbox 1 ??assembled with motor
????barrel recoil gearbox 1 ??assembled with motor
????barrel elevation gearbox 1 ??assembled with motor
??speaker 82x42x32 1
??steel ball M4 3
??tightwire 2x(240+225mm) 1
?????????screw?nut?washer?E-ring
M2x6mm 9 ????screw
M2.5x6mm 6 ????screw
M3x8mm 42 ????screw
M4x6mm 7 ????screw
M5x14 2 ????screw
M2.5x8mm 3 ??screw
M4x8mm 1 ??screw
M3x4mm 28 ???screw
M2 6 ??E ring
M4 10 ??E ring
M2 1 ??nut
M2.5 3 ??nut
M3 40 ??nut
M5 2 ??nut
M2 2 ?spring washer
M3 40 ?spring washer
M5 2 ?spring washer
M2 2 ???washer
M2.5 3 ???washer
M3 42 ???washer
ST2.9x25mm 2 ??????tapping screw
ST2x6.5mm 11 ??????tapping screw
ST2.2x6.5mm 10 ??????tapping screw
ST2.2x13mm 3 ??????tapping screw
??drive bearing 8x12x10mm 2 ?needle bearing
???tool pack 1
???Instruction 1
??carton 1
dave

moin

can i buy it now some were??

cu christian

hi chris its not yet made as such i will be stocking it in april when they send them to me they are just finishing the kit off now thanks dave

ah you going to deal with it?
haw many you have odered?

the dealer in germanys say hobben want to many kits to order so ouer dealers are afrais do order a 20 feet container.

cu christian

hi i have 8 on order to see how they go as it is only the kit that i have listed no dmd or electrics with it thanks dave

ah ok,
have you just an idea about price of your kit?
were exacktly have you odered?

cu christian

hi from hoobeen and it will be £195 GBP + POST thanks dave

i dave seems a good price that with or without electronics / gearboxes / motor parts (turret elevation ect)

cheers mate,

Matt

hi matt all the parts you will get with the tank are listed above on the tank list no electrics its the best price i can do at the moment there is very little room in them for money but i will make a small bit for my trouble thanks dave

So £200 for a static tank, but comes with gearboxes etc... do we know for sure if its Tamiya compatable?

Tempted