- IMG_7636.jpeg (1.82 MiB) Viewed 857 times
- IMG_7637.jpeg (1.88 MiB) Viewed 857 times
- IMG_7638.jpeg (1.82 MiB) Viewed 857 times
- IMG_7639.jpeg (1.7 MiB) Viewed 857 times
StuG III with some Tankriders.
Forum rules
If you're planning on posting a log of your build please use the relevant build sections.
If you're planning on posting a log of your build please use the relevant build sections.
Re: StuG III with some Tankriders.
Here we go, all packed heading towards the front…
- Attachments
-
- IMG_7640.jpeg (1.75 MiB) Viewed 857 times
Re: StuG III with some Tankriders.
4 more…
- IMG_7641.jpeg (1.75 MiB) Viewed 857 times
- IMG_7642.jpeg (1.96 MiB) Viewed 857 times
- IMG_7643.jpeg (2.02 MiB) Viewed 857 times
- IMG_7644.jpeg (1.68 MiB) Viewed 857 times
-
Herr Dr. Professor
- Major
- Posts: 5567
- Joined: Mon Apr 22, 2019 10:48 pm
- Location: Southern Wisconsin USA
Re: StuG III with some Tankriders.
Superb...just superb! 
-
PainlessWolf
- Lieutenant-Colonel
- Posts: 7677
- Joined: Sun Feb 26, 2012 9:09 pm
- Location: Southern Colorado Rocky Mountains
Re: StuG III with some Tankriders.
Good Morning, Rob!
What we have here is The StuG Life...Achieved! Beautiful Work!
regards,
Painless
What we have here is The StuG Life...Achieved! Beautiful Work!
regards,
Painless
...Here for the Dawn...
Re: StuG III with some Tankriders.
Thank you guys!
I purchased this StuG back in 2020 or so, maybe 2019.
Rebuild it, added the Saukopf, aluminum Schurzen, brass brackets, brass Railing on the motordeck, metal MG shield, metal hatches above the gearboxes, sprayed it in Dunkelgelb and that was it.
Lots of projects (and almost finished projects) after this StuG, because I could not find a proper camo scheme, which I liked.
Until this one showed up, a few days ago.
This is my 5th StuG and by far the best one I ever rebuild.
Some stuff is not available anymore right now, like the Atak Zimmerit and the Atak Zusatzpanzerung I added to this beauty!
So, now this project is almost finished, finally, I can proceed with my other StuG with the Winterketten.
Still have to paint the tools, and other minor stuff to complete it, and finally I will take some outdoor shots.
In fact, this is a brand new StuG, it never even run a single inch! When I bought it, I was rebuilding the house we live in today. Started rebuilding this assault gun when time was available, so no clue if it will run...or not....
There must be a build thread on here too....
Anyway...
Until then,
Rob.
I purchased this StuG back in 2020 or so, maybe 2019.
Rebuild it, added the Saukopf, aluminum Schurzen, brass brackets, brass Railing on the motordeck, metal MG shield, metal hatches above the gearboxes, sprayed it in Dunkelgelb and that was it.
Lots of projects (and almost finished projects) after this StuG, because I could not find a proper camo scheme, which I liked.
Until this one showed up, a few days ago.
This is my 5th StuG and by far the best one I ever rebuild.
Some stuff is not available anymore right now, like the Atak Zimmerit and the Atak Zusatzpanzerung I added to this beauty!
So, now this project is almost finished, finally, I can proceed with my other StuG with the Winterketten.
Still have to paint the tools, and other minor stuff to complete it, and finally I will take some outdoor shots.
In fact, this is a brand new StuG, it never even run a single inch! When I bought it, I was rebuilding the house we live in today. Started rebuilding this assault gun when time was available, so no clue if it will run...or not....
There must be a build thread on here too....
Anyway...
Until then,
Rob.
Re: StuG III with some Tankriders.
This morning I finished the tools, towcables and so
- IMG_7655.jpeg (1.93 MiB) Viewed 825 times
- IMG_7657.jpeg (2.45 MiB) Viewed 825 times
- IMG_7658.jpeg (2.41 MiB) Viewed 825 times
- IMG_7659.jpeg (2.43 MiB) Viewed 825 times
Re: StuG III with some Tankriders.
There is such a gap on all StuGs between the gunmantled and superstructure.
On one of my other StuGs I added a tarp on top of it, on this StuG with the Saukopfblende I didn‘t want to cover that up.
I had another solution made a while ago but during my paintsession it broke!
So I had to make a new one:
On one of my other StuGs I added a tarp on top of it, on this StuG with the Saukopfblende I didn‘t want to cover that up.
I had another solution made a while ago but during my paintsession it broke!
So I had to make a new one:
- IMG_7660.jpeg (2 MiB) Viewed 823 times
- 9133C092-0626-4BDB-9BAF-962311FED223.jpeg (2.91 MiB) Viewed 823 times
- 7B7FF516-2C97-4153-AF2D-E11D04224872.jpeg (2.73 MiB) Viewed 823 times
- 512BFC21-6B3C-4E19-889A-BF11DA42E065.jpeg (2.57 MiB) Viewed 823 times
- BF11E0D3-8F65-417B-92CF-F3ACDD7B8010.jpeg (2.29 MiB) Viewed 823 times
Re: StuG III with some Tankriders.
By now we reached the end of this long build!
Was fun to do and I am more than satisfied with the result in the end!
So for the last time a few pics of the finished model.
CU at my next thread about my StuG with Winterketten!
Rob.
Was fun to do and I am more than satisfied with the result in the end!
So for the last time a few pics of the finished model.
CU at my next thread about my StuG with Winterketten!
Rob.
- IMG_7680.jpeg (1.73 MiB) Viewed 821 times
- IMG_7681.jpeg (1.76 MiB) Viewed 821 times
- IMG_7682.jpeg (1.9 MiB) Viewed 821 times
- IMG_7683.jpeg (1.8 MiB) Viewed 821 times
- IMG_7684.jpeg (1.88 MiB) Viewed 821 times
- IMG_7685.jpeg (2.11 MiB) Viewed 821 times
-
Panzermechaniker
- Sergeant
- Posts: 590
- Joined: Wed Feb 08, 2023 1:04 am
- Location: Toronto
Re: StuG III with some Tankriders.
Came out great. What material did you use for the tarp?
