RC Tank Warfare community hobby forum

If it’s the pziii bin we have. I think we have both because there was one done for an early tiger I think

Exhibitedbrute wrote: ↑Sat Nov 09, 2024 9:31 am I can print. Depends where it needs sending

This is a great opportunity I'm located in New York.

Exhibitedbrute wrote: ↑Sat Nov 09, 2024 9:31 am If it’s the pziii bin we have. I think we have both because there was one done for an early tiger I think

Very cool. My only understanding of printing for these tanks is to use a resilient medium/product. I've seen that some are effected by sunlight and temperatures. IF I do this I want it to be as solid for use outdoors in the environment and all conditions from summer heat to winter snow. I don't know if that complicates things, just let me know I am interested for sure. Shipping would be to the U.S. postal code 10579. Thank you so much for considering/offering this.

Anton

I have asked and he hasn’t designed any pziii he just re sizes the existing ones where possible and just leaves them where not. That’s not to say he won’t do any. Now if you wanted Sherman ones we have those

Exhibitedbrute wrote: ↑Sat Nov 09, 2024 1:18 pm I have asked and he hasn’t designed any pziii he just re sizes the existing ones where possible and just leaves them where not. That’s not to say he won’t do any. Now if you wanted Sherman ones we have those

Thank you for asking.I guess I have to decide whether I leave it stock or choose this SOL unit as I haven't found another option-
https://www.rctank.de/SOL-1-16-Panzer-I ... -resin-set

Perhaps ask Andy at AHHQ if he can source spruces from Das Werk or one of the others he’s tight with that make a PzIII ?

HERMAN BIX wrote: ↑Tue Nov 12, 2024 7:03 pm Perhaps ask Andy at AHHQ if he can source spruces from Das Werk or one of the others he’s right with that make a PzIziI ?

I hadn't thought of that, thank you. I did check his site out because he offers SOL figures and thought on the off chance he might even offer the SOL bin but nope. I will ask them. Annnnd since it is Das Werk I'm also going to post up the question on Das Werks public group that I'm already on Facebook Groups. Very good suggestion Mr.Bix

HERMAN BIX wrote: ↑Tue Nov 12, 2024 7:03 pm Perhaps ask Andy at AHHQ if he can source spruces from Das Werk or one of the others he’s right with that make a PzIziI ?

And there we go-





A member there guided me to Hobby DNA-

https://www.hobbydna.com/collections/parts-374

To look for the Tumpeteer part. But alas none was found and searching for it was painful page by page. Sooooo nothing yet.

I will try find one to print for you in the mean time

Ive had it on good authority that the Sol version is hollow and can have blemishes ( Thanks Mr Glover)
I'd really push to get comms to AHHQ and see how it goes.
Or, buy a Takom or Das Werk PzIII & use the detail bits where you can.
The rest can be used on a Stug (which you dont yet have - but you will) so nothing will go to waste !!