RC Tank Warfare community hobby forum

MrChef wrote: ↑Wed Jan 03, 2024 4:03 am Chris it's modding the center turning point or axis of how the turret is mounted. There used to be clear instructions how to do this mod here including pics. There are some members who have pics of what they've done. Here is a link to a description of one way it's done. including pics-

https://rctanksaustralia.com/forum1/vie ... ?f=22&t=17

Meter rat wrote: ↑Wed Jan 03, 2024 3:05 pm Chris, that would be fine. It would go with your Kelly’s Sherman.

MrChef wrote: ↑Tue Jan 02, 2024 9:33 pm

Meter rat wrote: ↑Tue Jan 02, 2024 8:15 pm Just pulling your leg.

You can pull my leg all you like. That is where I drew the line.

Funny no one mentions 3D printing this mod instead of hack and slashing your way through it.

I have ZERO desire to do "that" much.

jarndice wrote: ↑Wed Jan 03, 2024 4:17 pm If you go to HL Builds you should find details on how to correct the Turret failing, It includes the measurements so all you need is a piece of paper to make a template which you transfer to the tanks upper hull then mark and cut, An easier job is the join between the front fender and the side fender, there should be a visible gap between them, easy fix, just draw a saw blade between the two.

MrChef wrote: ↑Wed Jan 03, 2024 7:57 pm

jarndice wrote: ↑Wed Jan 03, 2024 4:17 pm If you go to HL Builds you should find details on how to correct the Turret failing, It includes the measurements so all you need is a piece of paper to make a template which you transfer to the tanks upper hull then mark and cut, An easier job is the join between the front fender and the side fender, there should be a visible gap between them, easy fix, just draw a saw blade between the two.

Thanks, yes I saw it before Thano's snapped his fingers and the pics disappeared.

Not for me. To each his own.