RC Tank Warfare community hobby forum

atcttge wrote:The bags are wot I need as well as the ammo cans. Camo netting and tarps are easy to do but it's not all tarps and netting the crew carries ahehe.... Anyone has an MRE box template I can copy and print out?

I don't need a rack to store the paint spray cans because these get exhausted almost always during a paint session hahahaha!

They have a bunch of images if you Google it...thing is most are very low resolution...and most you can't read the print
Seems you might be able to look for them on EBAY too...some were linked to some auctions

ALPHA

Finally touched up the brown and gloss coated the turret. Also painted the wheels and metal idlers and gloss coated as well. Flat coat will be after everything is done.

Here are comparison shots of the two NATO buddies:









The Leo2 is a hangar queen and needs repairs (read: new lower hull because I damaged it) hence it's dusty.

Thanks for the links!

looking good Atc . Nice to see to see the hulls together if only for the picture. Looks like other then finishing bits and pieces your close to finished with the exterior.

Here you go ATC...don't forget this
http://www.ebay.co.uk/itm/Kit-Porcelain ... 25ac4c1854



ALPHA

Some decals! ^_^









The last one wasn't clear thanks to the anti-slip nyahahahahaha! It is the MLC 70 symbol (a 70 inside a circle indicating that the vehicle has a Military Load Class of 70 tons).

Nicely done! ;o)
regards,
Painless

Looks good with some markings on it. You plan on any other markings Atc ?

Thanks guys.

Scalawag: the corners are painted masking tape. Seems those are Velcro strips after looking at many CIP pix.

GG: Yep. The bumper codes and a few chevrons and some numbers etc

Cool! I've never seen those photos. My clue was a field manual of a tractor that had sections on how to install and clean a CIP. Thanks!