Re: Tanks to print
Posted: Sat Oct 07, 2023 12:06 pm
They think of everything now eh!!
yep, makes it more fun, but also a bit more complicated to control
RC Tank Warfare community hobby forum
RC Tank Warfare community modelling hobby forum
https://www.rctankwarfare.co.uk/forums/
3D models to print
https://www.rctankwarfare.co.uk/forums/viewtopic.php?t=32236
Page 31 of 54
Re: Tanks to print
Posted: Sat Oct 07, 2023 12:59 pm
Re: Tanks to print
Posted: Sun Oct 08, 2023 4:33 pm
Re: Tanks to print
Posted: Sun Oct 22, 2023 10:26 am
from Inkor, the centurion mk III in 1/16 https://cults3d.com/en/3d-model/various ... n_zvoCfiDk
Re: Tanks to print
Posted: Sat Oct 28, 2023 4:50 pm
Re: Tanks to print
Posted: Sun Oct 29, 2023 12:26 pm
Hi there,
just a question, what's a good 3d-printer to print scale 1/6
just a question, what's a good 3d-printer to print scale 1/6
Re: Tanks to print
Posted: Sun Oct 29, 2023 12:29 pm
Hi Fabian,
Maybe you can ask your question better here: viewtopic.php?t=14690&start=680
But it is mostly depending on how the model is "cut" in pieces, often the designers tell what the minimum size buildplate is which will be necessary.
Re: Tanks to print
Posted: Mon Nov 06, 2023 12:24 pm
A jagdtiger in 1/16 from Inkor: https://cults3d.com/en/3d-model/various/jagdtiger
Re: Tanks to print
Posted: Thu Nov 09, 2023 2:03 pm
I shall look at that topic.jee wrote: ↑Sun Oct 29, 2023 12:29 pmHi Fabian,
Maybe you can ask your question better here: viewtopic.php?t=14690&start=680
But it is mostly depending on how the model is "cut" in pieces, often the designers tell what the minimum size buildplate is which will be necessary.
Thank"s Jaap. (En is het al koud daar?)
Re: Tanks to print
Posted: Fri Nov 10, 2023 6:59 am
Great!Fabianm5 wrote: ↑Thu Nov 09, 2023 2:03 pmI shall look at that topic.jee wrote: ↑Sun Oct 29, 2023 12:29 pmHi Fabian,
Maybe you can ask your question better here: viewtopic.php?t=14690&start=680
But it is mostly depending on how the model is "cut" in pieces, often the designers tell what the minimum size buildplate is which will be necessary.
Thank"s Jaap. (En is het al koud daar?)
Het is hier nu rond het vriespunt, 's nachts vriest het
zal wel snel veel kouder worden hoor, normaal gesproken is het gemiddelde -20