1/16 Pz2 F - WIP

All things 3D printing. Printers, design, CAD, hints and tips, models built.
User avatar
Herr Dr. Professor
Major
Posts: 5398
Joined: Mon Apr 22, 2019 10:48 pm
Location: Southern Wisconsin USA

Re: 1/16 Pz2 F - WIP

Post by Herr Dr. Professor »

"[F]rom what i understand the petrol driven tanks didn't smoke a lot." My experience is with farm tractors from 1938 and 1939: there is, indeed, plenty of stink, but very little smoke--although the black soot evidences the unburned hydrocarbons of inefficient combustion. 8O If I were given the choice, I would take smoke from the gun barrel and soot from the exhaust, leaving little spots of soot all over the house, a sure means to marital harmony. :haha:
ziddan
Private
Posts: 56
Joined: Sun Mar 19, 2023 5:10 pm
Location: Just outside of Stockholm in Sweden.

Re: 1/16 Pz2 F - WIP

Post by ziddan »

Righto, got it out for a first test drive after receiving a pair of escs.

phpBB [video]


This is flat out full throttle, the speed looks pretty scale and nice but it is noticeably underpowered when i tried it on my diamond pattern foam mat at home, wont turn on a grippy surface.

The yellow gearboxes have a reduction of 48:1 and from the gearbox out to the drive sprocket axle is another 2:1.

Should i look for some other 130 motors with more torque or go to something else?

Anyways, beyond low torque im happy with how this is turning out.
Post Reply

Return to “3D Printing”