Torro KV 1 864 build ,repaint, weather, elmod new sounds

Captain Hilts · Post by **Captain Hilts** » Sat Mar 27, 2021 11:54 am

Herr Dr. Professor wrote:Rad's markings really make your KV-1 stand out! You have much there of which to be proud.

Hi Doc. Thanks for the remarks, yes the markings are nice , but now for weathering and messing them up a little

. Will post more on that later.

Captain Hilts · Post by **Captain Hilts** » Sat Mar 27, 2021 5:52 pm

Moving on , I painted the tracks oxide red , then a mixture of dark grey and gun metal, then with randon earth tone soft pastels i scraped them into a small mixture of water and painted them on, let it dry and covered with a flat varnish

Herr Dr. Professor · Post by **Herr Dr. Professor** » Sat Mar 27, 2021 6:05 pm

Captain,

What are you (and anybody reading) using for the flat varnish? For a long time, I have used Testor's Dullcote, a US brand, but I am told that the brand is now kaput. I can get large cans of Rust-O-Leum clear flat at "big box" building stores, and I wonder if this stuff would work just as well. Thanks!

Captain Hilts · Post by **Captain Hilts** » Sat Mar 27, 2021 6:17 pm

Next a couple of coats of gloss over the tank , and a couple of coats of this mig filter , the whole thing has suddenly got darker . But seems to bring the contrast together better . So following on with the tips on the Wilder KV 1 Finishing technics video series , except im making my own pin washes and splashes from oil paint.

Captain Hilts · Post by **Captain Hilts** » Sat Mar 27, 2021 6:18 pm

phpBB [video]

Captain Hilts · Post by **Captain Hilts** » Sat Mar 27, 2021 7:28 pm

Herr Dr. Professor wrote:Captain,

What are you (and anybody reading) using for the flat varnish? For a long time, I have used Testor's Dullcote, a US brand, but I am told that the brand is now kaput. I can get large cans of Rust-O-Leum clear flat at "big box" building stores, and I wonder if this stuff would work just as well. Thanks!

Hi doc
I've never heard of Rust-O-Leum, I used tamiya flat clear XF86 on the tracks , which I finished on them , then I went to the local model shop here and was recommended mig lucky ultra matt for acrylics which can be sprayed over the paint or you can add to gloss paint also as a flattener. I have only used it flattening some glosses so far and it's ok, after all the weathering on this build I thought it was flat enough and didn't want to chance ruining the contrast between the oils and pigments with a coat of flat. I'm sure there's guys here who can advise me and you on varnish.

Captain Hilts · Post by **Captain Hilts** » Sat Mar 27, 2021 7:51 pm

Next up, pin washing and dot washing with oil paints. Sorry the lighting in this room is terrible and with a phone camera its hard to get good pics. But its getting lighter and the modulation seems to be making sense now. and the wheels are back on

Captain Hilts · Post by **Captain Hilts** » Sat Mar 27, 2021 8:58 pm

Next working my way around painting scratches with light green.

Captain Hilts · Post by **Captain Hilts** » Sat Mar 27, 2021 9:34 pm

Now to sort out that bug eye headlight with a clear lens and a smaller cool led that shines more yellow like old bulbs , and some braided wire protection made from string and a new antenna made from brush handle and wire.

Herr Dr. Professor · Post by **Herr Dr. Professor** » Sun Mar 28, 2021 8:47 pm

Thank you. I am not surprised that you have "never heard of Rust-O-Leum." I think the brand is not sold outside North America. I have used Tamiya flat clear XF86, an expensive but fine clear-coat. I can get Mig paints here in the U.S. so I will have a look at Lucky Ultra Matt when I finally get back to a brick-and-mortar hobby store. Meanwhile, I am enjoying your KV-1 build.