Re: Famo Flak 88mm
Posted: Sat Feb 08, 2020 11:09 pm
Just WOW! It’s incredible build!!! 
RC Tank Warfare community hobby forum
RC Tank Warfare community modelling hobby forum
https://www.rctankwarfare.co.uk/forums/
Famo Flak 88mm
https://www.rctankwarfare.co.uk/forums/viewtopic.php?t=27595
Page 4 of 7
Re: Famo Flak 88mm
Posted: Sun Feb 09, 2020 10:30 am
You could pretty much reverse engineer this magnificent build to full size and it would appear to want for nothing
Re: Famo Flak 88mm
Posted: Mon Mar 02, 2020 10:11 pm
the work continues:
The soft rubber tube centers the cabinet stem and allows the stem to move in the outer tube
The various stages of assembly, we are close to industrial production
the first one on the right is the resin
The dimensions of the sphere satisfy the officer. Finally the stabilizing legs:
To gratify the soul of the spectators, the workers positioned turret & Rheinmetall. Definitely an imposing stuff: lol !:
Le Patrie Officine Studio salutano i pazienti spettatori con la novità dell'88:
Nell'ordine,da destra verso sinistra, osserviamo:
- 88 original Juckenburg in 1:16 scale
- 88 obtained from the Wespe in 1:15 scale brought back to the dimensions of the Juckernburg, drilled for the entire length for any flash installation
- 88 printed in 3D starting from the mathematical model
a preview of the new system:
After a period of tribulation, looking for suitable servos for use, we finally found a valid solution:
the barrel of the 88 is held in position by paper tape but was indispensable for evaluating the reaction to the weight of the chosen servant
in the second video you can see the position of the servant who commands the elevation. It acts through a toothed wheel directly on the toothed arch which is located under the slide
We lower the stabilizers and aim high:
The soft rubber tube centers the cabinet stem and allows the stem to move in the outer tube
The various stages of assembly, we are close to industrial production
the first one on the right is the resin
The dimensions of the sphere satisfy the officer. Finally the stabilizing legs:
To gratify the soul of the spectators, the workers positioned turret & Rheinmetall. Definitely an imposing stuff: lol !:
Le Patrie Officine Studio salutano i pazienti spettatori con la novità dell'88:
Nell'ordine,da destra verso sinistra, osserviamo:
- 88 original Juckenburg in 1:16 scale
- 88 obtained from the Wespe in 1:15 scale brought back to the dimensions of the Juckernburg, drilled for the entire length for any flash installation
- 88 printed in 3D starting from the mathematical model
a preview of the new system:
After a period of tribulation, looking for suitable servos for use, we finally found a valid solution:
the barrel of the 88 is held in position by paper tape but was indispensable for evaluating the reaction to the weight of the chosen servant
in the second video you can see the position of the servant who commands the elevation. It acts through a toothed wheel directly on the toothed arch which is located under the slide
We lower the stabilizers and aim high:
Re: Famo Flak 88mm
Posted: Tue Mar 03, 2020 3:04 am
Good evening,
A powerfully entertaining Build with plenty of obstacles overcome and eye candy to marvel at! Following along.
regards,
Painless
A powerfully entertaining Build with plenty of obstacles overcome and eye candy to marvel at! Following along.
regards,
Painless
Re: Famo Flak 88mm
Posted: Tue Mar 03, 2020 9:48 am
Fabulous details and engineering!
Sent from my iPad using Tapatalk
Sent from my iPad using Tapatalk
Re: Famo Flak 88mm
Posted: Tue Mar 03, 2020 12:50 pm
Stunning work, stunning skills and stunning results. Just love it!
Re: Famo Flak 88mm
Posted: Tue Mar 03, 2020 2:49 pm
OH WOW 
Re: Famo Flak 88mm
Posted: Fri Mar 13, 2020 5:50 pm
The struggle continues, let's go back to the trenches:
The rotation of the turret had been brought home. Now the elevation. Recoil was missing. I was trying to convince myself that it was an acceptable sacrifice. After all, he doesn't have to shoot.
But the motto of "Patrie Officine Studios" is "Zero Tolerance". or compromises. No fallback solutions. Virtually three weeks of work. To think technically correct solutions, with acceptable impacts on the model.
There he is:
I thank Ivano for his splendid card (IBU2) and for the support he gave me.
It seemed impossible ..... also this time it seems to me that the result has been achieved.
Put the breech back in the correct position:
The rotation of the turret had been brought home. Now the elevation. Recoil was missing. I was trying to convince myself that it was an acceptable sacrifice. After all, he doesn't have to shoot.
But the motto of "Patrie Officine Studios" is "Zero Tolerance". or compromises. No fallback solutions. Virtually three weeks of work. To think technically correct solutions, with acceptable impacts on the model.
There he is:
I thank Ivano for his splendid card (IBU2) and for the support he gave me.
It seemed impossible ..... also this time it seems to me that the result has been achieved.
Put the breech back in the correct position:
Re: Famo Flak 88mm
Posted: Sat Mar 14, 2020 11:18 am
IT looks great, I like it very much. Well done.
Greets, Nobbi.
Greets, Nobbi.
Re: Famo Flak 88mm
Posted: Wed Apr 08, 2020 10:26 am
What an amazing job. Your work and your details are awesome...