Page 4 of 4
Re: Heng long 4th generation controller
Posted: Wed Aug 23, 2017 10:55 am
by pumuklis
Jay-Em wrote:The micro switch on the back of the gun is missing. I doubt You can get a main gun "boom" without that. Or, if the microswitch sits at the side of the gun. If so, the following goes:
The 2 wires from the microswitch go directly into the Ch3 "mg" port on the controller. They don't use the connection block thingy.
By the by, the triple socket's outer 2 pins are for a machinegun.
I dismantled a tower.
Which wire must be binder controller?
Re: Heng long 4th generation controller
Posted: Wed Aug 23, 2017 12:53 pm
by pumuklis
Or how does a gunshot sound work?
Airsoft is doing a shot. Airsoft limit switches the microswitch, closes control circuit, and has cannon shot sound.
That's right?
If so, can you directly close the control gun shot circuit?
So I completely skip airsoft.
I hit the radio with a shot, so is there a gun shot of the controller?
Re: Heng long 4th generation controller
Posted: Sat Aug 26, 2017 10:38 am
by pumuklis
Can someone answer you?
Can I get a separate microswitch or microswitch pistol?
Re: Heng long 4th generation controller
Posted: Fri Sep 22, 2017 8:21 am
by pumuklis
Hello!
Can this be covered by a 4th generation controller?
Can anyone show a connection?
https://heng-long-panzer.de/de/product_ ... no_boost=1
