T95 gun motor carrage

If you have a tank query and you can't find the answer anywhere else, post here. (TIP - Check for answers in FAQ, use the 'search' facility or even check this board before posting here).
Forum rules
If your question is electronics related please post it in one of the relevant boards here: viewforum.php?f=31
Post Reply
seejianshin
Recruit
Posts: 23
Joined: Thu Jun 19, 2014 1:41 pm

Re: T95 gun motor carrage

Post by seejianshin »

Thanks Alpha but I wanted removable tracks, two axels sticking out of the sprockets is not the best idea.
Thanks.
Top
seejianshin
Recruit
Posts: 23
Joined: Thu Jun 19, 2014 1:41 pm

Re: T95 gun motor carrage

Post by seejianshin »

Hey guys I found this pic, which could be the answer, or the question to my build. Notice the bulge on the rear sprocket, it could be the connection between the outer and inner tracks.
Attachments
What a monster tank!
What a monster tank!
T-28 Super Heavy 008.jpg (27.77 KiB) Viewed 1171 times
Top
ALPHA
Major-General
Posts: 10960
Joined: Thu Oct 03, 2013 1:06 am

Re: T95 gun motor carrage

Post by ALPHA »

seejianshin wrote:Hey guys I found this pic, which could be the answer, or the question to my build. Notice the bulge on the rear sprocket, it could be the connection between the outer and inner tracks.
Shin.... there is not connection of the tracks themselves.... four separate rows....Anyway got good and bad news for you.... you remember Sassgrunt... well he dropped off the set of sprockets he built up... as he isn't good with photos... so I'll take them apart and photograph them for you

ALPHA
Top
User avatar
jackalope
Lieutenant
Posts: 3882
Joined: Fri Jun 20, 2014 7:42 pm
Location: Communist State of Maryland, United States.

Re: T95 gun motor carrage

Post by jackalope »

This is like trying to build a Corvette from a Mustang, or an Aston Martin from a Jaguar. :think:
Top
seejianshin
Recruit
Posts: 23
Joined: Thu Jun 19, 2014 1:41 pm

Re: T95 gun motor carrage

Post by seejianshin »

More like building a tank with a car......
Top
User avatar
jarndice
Colonel
Posts: 8398
Joined: Mon Sep 03, 2012 11:27 am
Location: the mountains of hertfordshire

Re: T95 gun motor carrage

Post by jarndice »

Or a jerry can from a bucket. shaun
I think I am about to upset someone :haha:
Top
ALPHA
Major-General
Posts: 10960
Joined: Thu Oct 03, 2013 1:06 am

Re: T95 gun motor carrage

Post by ALPHA »

jackalope wrote:This is like trying to build a Corvette from a Mustang, or an Aston Martin from a Jaguar. :think:
seejianshin wrote:More like building a tank with a car......
jarndice wrote:Or a jerry can from a bucket. shaun
:haha: :haha: :haha:

ALPHA
Top
seejianshin
Recruit
Posts: 23
Joined: Thu Jun 19, 2014 1:41 pm

Re: T95 gun motor carrage

Post by seejianshin »

Hi guys i had a new question, how do you remove the heng long wheels?
Top
ALPHA
Major-General
Posts: 10960
Joined: Thu Oct 03, 2013 1:06 am

Re: T95 gun motor carrage

Post by ALPHA »

seejianshin wrote:Hi guys i had a new question, how do you remove the heng long wheels?
The Sprockets and idlers or the road wheels themselves?

The sprocket has an Allen screw ...sometimes phillips holding it to the axle...the rest of the wheels you have to split in half...be very careful...sometimes running a saw blade on the inner helps... sometimes it doesn't ...it depends on how much glue was put on in the factory...you will find some are easy and will separate with a flat head screwdriver....the other option is to drill out the center hub of each wheel allowing you to access the screw ;)

ALPHA

PS ...sorry shin..haven't had time to photograph Sassgrunt's sprockets ... hopefully later today ;)
Top
seejianshin
Recruit
Posts: 23
Joined: Thu Jun 19, 2014 1:41 pm

Re: T95 gun motor carrage

Post by seejianshin »

Thanks Alpha,
For the wheels, i removed every one of them by drilling on the centre hub. :-)
As for the picture, Alpha please take your time since my gun, wheels, tracks, crystals and more had not arrived yet, so i really cannot start yet.
Thanks in advance.
Top
Post Reply

Return to “General Questions”