RC Tank Warfare community hobby forum

tamiya tracks sorted the issue's I had With the Stock tracks and metal sprockets

Back to the turret again to finish it




1/35 vs 1/16

Adding dust and dirt, slowly building up layers





Stump and blend with WS

Adding dust and small debris along the fenders, one part at the time. Loosly adding it, placing it with a smal brush, then semi fix it and 'wash' it out with some white spirit, then when dry , add a dropp of pigment fixer

Moving along . Oil drum with bullet holes. Oil spill and smal tarp covering a track link.

Some overall shots of the turret,dust (pigments + WS )and splatter ( AK dark mud) , streaks(AK streaking Grime) Not going to over do it , so I'm calling it pritty much done(MG needs to be painted though, and I might add a few more rust streaks )

Max,
She is a Beauty. *bows* Realism effects like those are few and far between.
regards,
Painless

Came out real nice Max.... you going to do markings ?

ALPHA

Hmm, I thought about do like I have seen others do on KV2 turret, like on IS, white ( worn) band, but I tink I'll leave it as it is now.


Nearing the end, but still I wanted to add a few bit's more. The big fenders has so much space, I must resist adding to much stuff , ore I 'll never be able to wrap this build. Now do tell if I've overseen anything you think should be done / added thanks

0,6 mm Steel wire. 'Home' made burning fluid. and some AK track pigment.

To break things up a little I desided to do one of the toolboxes in a worn Winter state. Normal procedure were done , hairspray, tamiya white thinned, and warm water.
after, light washes and mud splashes were added to both





Some more vegitation were also added