Page 4 of 15
Re: munitionsschlepper Pz III
Posted: Mon Aug 04, 2014 6:49 pm
by ALPHA
HERMAN BIX wrote:I looked at the Czech site thats similar to this one(but the spelling is way worse
) and there is a close up shot(s) of this tensioner being installed. You are right in saying be careful, by the pictures if its started wrong it will stay wrong.
Looks great & seems to work well, but my Czech needs some work to confirm this !!
Careful...those holes are tricky.... taking off the plastic molded on parts as well
ALPHA
Re: munitionsschlepper Pz III
Posted: Thu Aug 14, 2014 9:15 pm
by lister fiend
hi herman,
firstly let me thank you very much for the schurzen pdf, really handy
but alas it's for a panzer iv & there different to the panzer iii
now unfortunately i can't return the compliment & wop a pdf up for you
but i do have some photos, which may help.
heres my attempt
hope it helps & good luck dude
lister
Re: munitionsschlepper Pz III
Posted: Fri Aug 15, 2014 2:08 am
by ALPHA
Hey Lister...where do you get those tiny nuts and bolts
ALPHA
Re: munitionsschlepper Pz III
Posted: Fri Aug 15, 2014 5:18 pm
by lister fiend
Hey alpha,
There m2 & I got them from eBay.
The rivets are 1.6mm & I "borrowed" them from work
Re: munitionsschlepper Pz III
Posted: Sat Aug 16, 2014 7:37 am
by ALPHA
lister fiend wrote:Hey alpha,
There m2 & I got them from eBay.
The rivets are 1.6mm & I "borrowed" them from work
Great job on the fabrication
ALPHA
Re: munitionsschlepper Pz III
Posted: Tue Sep 16, 2014 12:44 pm
by HERMAN BIX
And so it begins......................now serving-number 3
Re: munitionsschlepper Pz III
Posted: Tue Sep 16, 2014 1:11 pm
by jarndice
Some of us have been sitting here waiting for you to turn up, where the h*ll have you been, I suppose it will be that old beat up Tiger that you keep wasting our time on, right, now you have decided to put in a days work, might I suggest you start by sweeping up the workshop.
shaun
Re: munitionsschlepper Pz III
Posted: Tue Sep 16, 2014 2:59 pm
by ALPHA
jarndice wrote:Some of us have been sitting here waiting for you to turn up, where the h*ll have you been, I suppose it will be that old beat up Tiger that you keep wasting our time on, right, now you have decided to put in a days work, might I suggest you start by sweeping up the workshop.
shaun
Two non-coms can sweep faster than one
ALPHA
Re: munitionsschlepper Pz III
Posted: Wed Sep 17, 2014 12:02 pm
by HERMAN BIX
ALPHA wrote:jarndice wrote:Some of us have been sitting here waiting for you to turn up, where the h*ll have you been, I suppose it will be that old beat up Tiger that you keep wasting our time on, right, now you have decided to put in a days work, might I suggest you start by sweeping up the workshop.
shaun
Two non-coms can sweep faster than one
ALPHA
Typical bourgeois ruling class eh Mr Jarndice
...............nah na-nanaaah na-nah get two of the lesser ranks to sweep
Well, it worked well out of the box, was perfectly acceptable, so there was only one next step
Re: munitionsschlepper Pz III
Posted: Wed Sep 17, 2014 12:09 pm
by HERMAN BIX
Yes, thats right, defy years of Q.A. & testing and MODIFY IT
!!!!!!!
Can anyone clarify what the ABC indexed penetration is in the lower hull ??
Does not seem to have any immediate use in respect to the standard model's requirements, so why is it there ?
its going to be closed over regardless, but curiosity being what it is.............why ?
The return rollers have been smashed with the glue monkey's weapon of choice - a fire hose - so they will be a "sacrificial lamb" when I really did not want too many complications.
This build is supposed to be like getting a sly moment with your best mates Mrs..............get in- get done- get out, but it seems I am going to be caught with me strides down.........I can just tell.
