RC Tank Warfare community hobby forum

Thanks, men! Painless, it was your jack photo that inspired me to do this. I’ll add the butterfly nuts tonight.

Good Morning,
I am glad to have been of use. ;o) You build something like that Jack and you say to yourself, "Well, I've done it and it turned out Ok but that level of realism is not needed on all your tanks" Then you find yourself niggling yourself into doing it again on another Build and that's when you realize that companies like ABER and VOYAGER are just glittering, intricate brass traps for the unwary modeler. ;o)

regards,
Painless

Those are the truest words I’ve read all morning!

Help! Somebody throw a rope down here. Deepest rabbit hole I’ve ever been in.
Here we go again with another upgrade part but it’s for function and not aesthetics. The Henn Tec idler system seems to be
one of the very best so I had to get one. My current idlers are wiggly and the Taigen tension system is fair but this HT system seems more robust and straightforward. Now I need to dig into ol’ Ugly and install it.
I know it’s posed up front and not back by the idler wheel but I just like showing the removed front road wheel


Sent from my iPhone using Tapatalk

Just fitted one in my Trumpeter T-34/76 and it fit like a glove. A wee bit of drilling and presto a perfect solid fit

Sent from my SM-N975U using Tapatalk

Good to hear. I’m waiting for Robert (the seller) to send a pdf file with instructions in English. For fun I tried reading the German instructions in a Benny Hill German accent. My wife doesn’t always get my attempts at humor.

Thats too funny Jim. Honestly I think you will be able to figure the fitment out yourself. I've added them to several of my tanks so far and it's worked for me without instructions....



Sent from my SM-N975U using Tapatalk

I have this uncanny ability to create my own difficulty and miss the most obvious. I’m sure I could figure it out but he offered to email the file so I’ll give it a good once over before scheduling the surgery.

Hi its a good upgrade , measure twice then drill so they say. the idlers were the 1st fail on my HL panther so fitted a Hentec.

Quick update. Got my new idler system installed with very little trouble. I used a Dremel to enlarge the hole in the metal hull. Gouged the plastic a bit ( it sure how) in a place that won’t be seen so no big deal. I’m a very impatient modeler. Bad habit.
Anyhoos, the new system is installed and this evening I’ll give ol’ Ugly a test run. Here’s a pic comparing the stock Taigen system and the more robust Henn Tec and a couple of other pics. Yes, I gouged the plastic.





Sent from my iPhone using Tapatalk