Page 30 of 111

Re: Bristol Armoured Division

Posted: Mon Jul 11, 2016 10:17 pm
by wibblywobbly
31st, Andy has it all booked, will be good to see you again. :thumbup:

Re: Bristol Armoured Division

Posted: Wed Jul 13, 2016 8:21 pm
by wibblywobbly
Painted, not perfect, but it's a lot better than it was.

Image

Sent from my phone using Fumblefingers v1.2

Re: Bristol Armoured Division

Posted: Thu Jul 14, 2016 9:34 pm
by wibblywobbly
Did some work on the hump, now has a real dirt road and a fence down each side.

Image

Image


Sent from my phone using Fumblefingers v1.2

Re: Bristol Armoured Division

Posted: Fri Jul 15, 2016 9:54 pm
by silversurfer1947
Looks good.

Re: Bristol Armoured Division

Posted: Fri Jul 15, 2016 10:19 pm
by wibblywobbly
If you can bring a big bag of earth to the next meet I can make good use of it, no need to powder it, I can use it as it comes.

Re: Bristol Armoured Division

Posted: Sun Jul 17, 2016 3:45 pm
by silversurfer1947
Not a problem, but I warn you, earth from my garden tends to come in large lumps ;D

Re: Bristol Armoured Division

Posted: Sun Jul 17, 2016 6:06 pm
by wibblywobbly
In my spare moments have been doing another roadway, but lengthways rather than widthways, if I am at a loose end I may even go and see if B&Q have a cheap bag of topsoil that will do the job. That way it will be done by the 31st.

Did you get anywhere with a housing for the Panzerfaust pcb, if you haven't built anything I could knock up a small shack or something. The led doesn't have to be in the actual Panzerfaust, it can be in the shack, with the guy just stood next to it.

Re: Bristol Armoured Division

Posted: Sun Jul 17, 2016 10:48 pm
by silversurfer1947
I'm away from home at present. All I have is ideas and hopefully a panzerbusch and a soldier waiting for me at home. If you could knock up something at least for the short term, that would give me some breathing space.

Re: Bristol Armoured Division

Posted: Mon Jul 18, 2016 9:05 am
by silversurfer1947
Just as a yardstick, the figure I shall be using is a 1/16 Tamiya standing soldier, so will be a good few millimetres taller than the 1/18 scale figures.

Re: Bristol Armoured Division

Posted: Tue Jul 19, 2016 11:21 pm
by Spartan tracks
Everything looking good guys, I'm going to try and make Sunday's meet, shall I bring any tanks ??? If I can manage it .